auto biography

[Sadret89]

Sounds easy!

I'll have to give it a go. What grade sand paper did you use if you remember?

[123*reggie]

Pass just found some in my tool box not to corse thought just a light sand like wet and dry just to get the prima to stay on

[Boomstyliemikey]

ru gonna do the case covering the battery?

[123*reggie]

Yes defo when I get the time 
An I recon a pipecrosser sticker on it to say what cone I have lol

[123*reggie]

Just got my White led bulbs for my reg plate and fitted my 8k hids in
Renualt was going to charge me £210 to fit them lol guess what I said to them lol (on yr renualt bike are you )
Done them my self canny easy to do hardest part was defo putting the balasters in a fix position

H.I.D's 8k



and the white L.E.D's regplate bulbs

[123*reggie]

well just debadged the megane sign from the boot looks much better now

and now

[Paddy]

Those hids look terrible in the orginal housing. No refactor lens.

Do i need to mention the on comming drivers,MOT fail, illegal...?

[123*reggie]

Those hids look terrible in the orginal housing. No refactor lens.

Do i need to mention the on comming drivers,MOT fail, illegal...?

They do have them they just turned up high to get the affect ov the HIDs 

[123*reggie]

just a quick up date dropped 70mm all round

and 8k hids put in

[Paddy]

Not HIDs in standard housing AGAIN!!

You will blind all on comming driver, fail your MOT and look a prize &*£$ in the process!

HIDs need a refrator (concave) lens in front of them for a reason!

Theres no way thats a 70mm drop, is it? If I lower mine to the full extent of the coil -65. The rubber sits within the arches and the bumpers are 1 inch off the ground. Mud guard 1/2 an inch.

[123*reggie]

Not HIDs in standard housing AGAIN!!

You will blind all on comming driver, fail your MOT and look a prize &*£$ in the process!

HIDs need a refrator (concave) lens in front of them for a reason!

Theres no way thats a 70mm drop, is it? If I lower mine to the full extent of the coil -65. The rubber sits within the arches and the bumpers are 1 inch off the ground. Mud guard 1/2 an inch.

Iv had to take off the front mud guards as it ripped the splash cover under Neath
I don't have any more coils to wind down and the say 70mm drop on fk coil overs :s

[TehSniper]

looking smart
how does the car feel on those coilovers as im looking at them right now, vmaxx costing 522 quid
and how did you do the debage? heatgun to melt the glue?

[Boomstyliemikey]

looking smart
how does the car feel on those coilovers as im looking at them right now, vmaxx costing 522 quid
and how did you do the debage? heatgun to melt the glue?

Hair dryer melts the glue, no need for a heat gun

[TehSniper]

i gave it a go...and the results were...horrible...not gonna lie, with the fade of the red, i had the words still there in the paint, even after a wash and polish and t cut and everything else i had in my auto glym set aha...gonna leave it for now

[Boomstyliemikey]

Stick a photo of it up, lets see what it looks like. Red cars are terrible for faded paint. Mind you when i removed my megane lettering you could still see the outline of it for a good week but it eventually went.