Hi guys. I'm having trouble trying to get one of these units to connect via bluetooth to my tablet. I have downloaded torquepro lite, and it connects to my transit no problem. Has anybody else experienced any such connectivity problems?
At first I thought that it might be a dodgy cheap unit, so I orderd one for a wee bit more but the issue persists. Any advice would be welcomed!
ELM 327 won't connect
Moderators: q292u, Ray, AndyAdmin, Stranger
-
mrvandango
- Posts: 22
- Joined: Sun Jan 17, 2016 10:19 am
- Currently Drives:: Megane 1.9 dci dynamique tourer
- Location: Dorchester Dorset
-
tanto12
- Learner Driver
- Posts: 64
- Joined: Sat May 26, 2012 6:00 am
- Currently Drives:: 2005 megane sport tourer
Re: ELM 327 won't connect
on my megane I need to have the engine running for the elm to connect and read if you get any codes turn off engine but keep dash light up to clear the codes
if at first you don't succeed get a bigger hammer
-
MeganeMule
- Learner Driver
- Posts: 64
- Joined: Fri Sep 04, 2015 8:44 am
Re: ELM 327 won't connect
On mine you have to put the key in, then press and hold the start/stop button WITHOUT pressing the clutch/brake for about 5 seconds until the dash lights etc come on and then you can connect.
Return to “Problems / Questions”
Who is online
Users browsing this forum: No registered users and 56 guests