My brother have just bought a Megane CC 2.0T recently, and he already have big plans for the car. The car is from 2004, and he has bought brand new ph.2 headlights and a complete Megane RS225 ph.2 frontbumper.
Last week we where up for the change, but ran into quite a dead end.
The car is fitted with OE xenon headlights, and we therefore bought OE xenon headlights for a ph.2 aswell including new controlunits, and honestly belived it all was plug n' play. We did that conversion on my ph.1 to ph.2 which was all plug n' play. However my car is not fitted with OE xenon but we thought it was quite the same operation. That I can tell is wrong.
The connectors on the 2 headlights are different, sad but true.
Connector on ph.1 is the white one
Connector on ph.2 is the black one
All wiring for the ph.1 headlight goes through this one connector, where the one in the ph.2 is divided in 2 connectors. One for the lights and one for the height adjusment for the low beam.
Is there anyone who have done this conversion or know what to do? Does there exist any kind of adaptors that fits between the headlights and the original wiring harness?
By any means we hope to be able to avoid cutting in the wiring harness.
I could use a little help..
