i have managed to fit this to the car , instruction were useless and i did a dry run first , i the wired it all together in the car before fitting to make sure it all worked the fitted and had a play
its pretty straight forward to install as all the wiring blocks are different, and the screen display that's already fitted is move to under the radio which then displays the time ,temp what station your playing (no rds on this display) or what function on the head unit you are using , the match of the plastic colour and fit is good but the only thing you have to do is use the old clips of the display surround and fit to the new surround
i removed the glove box and drilled a hole in it so i could pass the usb ,3g/wifi and ipod lead in to it i did not have to run the mic lead as i had a parrot bluethoth fitted and just used that lead , the gps Ariel is sited in front of the display by just passing the wires threw the demister vent
when all fitted i added a wifi dongle and tethered the unit to my phone so i can use the internet
the only thing i have left to do is remove the head unit and fix the mounting bolt on the back as it sag a little and protrudes and is not flush oh and work out how to use igo after using tomtom for many many years
old display and vent removed

head unit and pocket removed

glove box removed

display and vent

underside of display

new head unit fitted

display fitted

all together

menu set up

igo sat nav

map

radio

head unit and old display
