BMC- CDA Filter on M2 1.6l / 2.0l

For all stuff related to modifying your car

Moderators: q292u, Ray, AndyAdmin, Stranger

Post Reply
User avatar
xirc0m
Learner Driver
Posts: 95
Joined: Mon May 30, 2005 6:03 pm
Location: A Small Island .... Lion City... Singapore..
Contact:
Contact xirc0m

BMC- CDA Filter on M2 1.6l / 2.0l

Postby xirc0m » Thu Jun 02, 2005 3:01 pm

Has anyone here installed their M2 1.6l Engine with the BMC- CDA filter?
Last edited by xirc0m on Mon Apr 23, 2007 8:20 pm, edited 1 time in total.
The man of knowledge must be able not only to love his enemies but also to hate his friends.
Friedrich Nietzsche (1844 - 1900)

Image
Top
User avatar
xirc0m
Learner Driver
Posts: 95
Joined: Mon May 30, 2005 6:03 pm
Location: A Small Island .... Lion City... Singapore..
Contact:
Contact xirc0m

Re: BMC- CDA Filter on M2 1.6l

Postby xirc0m » Fri Jun 10, 2005 8:21 am

xirc0m wrote:Has anyone here installed their M2 1.6l Engine with the BMC- CDA filter?


Image
The man of knowledge must be able not only to love his enemies but also to hate his friends.

Friedrich Nietzsche (1844 - 1900)



Image
Top
Le Grand Crapaud
Rally Driver
Posts: 1128
Joined: Mon Mar 21, 2005 8:42 am
Location: Overlooking graveyard. Plot booked. Pretty picture awaited from commissioned artist!

Postby Le Grand Crapaud » Fri Jun 10, 2005 10:26 am

My experience in this area is limited but I would not install one considering its location in the engine compartment. Well located for noise inside the cabin which is what it's all about though!
Anton Bufonidae hops again and again and again and again and again!
Top
User avatar
xirc0m
Learner Driver
Posts: 95
Joined: Mon May 30, 2005 6:03 pm
Location: A Small Island .... Lion City... Singapore..
Contact:
Contact xirc0m

Postby xirc0m » Tue Jun 28, 2005 11:46 am

So far a friend of mine had installed BMC - CDA on his 2.0l M2... Very responsive... and not loss on the low end...

Mine yet to install... will keep you people updated...
The man of knowledge must be able not only to love his enemies but also to hate his friends.

Friedrich Nietzsche (1844 - 1900)



Image
Top
User avatar
soterman
Advanced Driver
Posts: 652
Joined: Sun Jun 05, 2005 11:20 pm
Location: Patras - Ioannina, Greece
Contact:
Contact soterman

Postby soterman » Tue Jun 28, 2005 9:32 pm

What about the noise withing the cabin? Did it increase?
'05 1.6VVT Megane II[/color]
Top
User avatar
xirc0m
Learner Driver
Posts: 95
Joined: Mon May 30, 2005 6:03 pm
Location: A Small Island .... Lion City... Singapore..
Contact:
Contact xirc0m

Postby xirc0m » Wed Jun 29, 2005 5:12 pm

1st day Run...

- 1 Hr Job with 2 manpower... :wink:

- No loss on low end

- Well Spread in Power & Torque

- Lots of Rev to Pull at 2nd gear onwards...

- And yet more to explore... :shock: :shock: :shock:

- Va Va Vrooom....!!!! :twisted: :twisted: :twisted: :twisted: (Cabin could hear ....but not extremely loud, only when u rev... idle or crusing...no obvious noise...)

- NEXT Project? Exhaust & Extractor?

Worth $ spend on... will further monitor....

Image
The man of knowledge must be able not only to love his enemies but also to hate his friends.

Friedrich Nietzsche (1844 - 1900)



Image
Top
Covkid
Learner Driver
Posts: 87
Joined: Tue Jun 28, 2005 12:13 pm
Location: COVENTRY

Postby Covkid » Thu Jun 30, 2005 7:14 pm

xirc0m wrote:So far a friend of mine had installed BMC - CDA on his 2.0l M2... Very responsive... and not loss on the low end...

Mine yet to install... will keep you people updated...


did he install the 1.6 BMC then?? Because i cant find one listed for the 2.0l :(

BUT.....

As luck would have it... I actually live 300 yards from ITG's factory and ive approached them about using my car as a donor car for their Maxogen Induction Kit.. as they dont do one yet for the 2.0l. They are getting back to me sometime next week :)
Speed narrows your perspective to a tunnel vision that neglects the glories beyond & the sky above......
Top
User avatar
xirc0m
Learner Driver
Posts: 95
Joined: Mon May 30, 2005 6:03 pm
Location: A Small Island .... Lion City... Singapore..
Contact:
Contact xirc0m

Postby xirc0m » Sat Jul 02, 2005 6:00 pm

Covkid wrote:
xirc0m wrote:So far a friend of mine had installed BMC - CDA on his 2.0l M2... Very responsive... and not loss on the low end...

Mine yet to install... will keep you people updated...


did he install the 1.6 BMC then?? Because i cant find one listed for the 2.0l :(

BUT.....

As luck would have it... I actually live 300 yards from ITG's factory and ive approached them about using my car as a donor car for their Maxogen Induction Kit.. as they dont do one yet for the 2.0l. They are getting back to me sometime next week :)


Sad to say M2's Current Space not able to fit the 2l version of BMC-CDA...only used and tested on 1.6l version BMC-CDA on the M2 2.0l engine...

So far I know someone had ITG been tested...no close to BMC-CDA...

Keep us inform if the Maxogen Induction Kit works on the 2.0l engine...

So far I am no fan using Foam Filter.... :wink:
The man of knowledge must be able not only to love his enemies but also to hate his friends.

Friedrich Nietzsche (1844 - 1900)



Image
Top
User avatar
xirc0m
Learner Driver
Posts: 95
Joined: Mon May 30, 2005 6:03 pm
Location: A Small Island .... Lion City... Singapore..
Contact:
Contact xirc0m

Postby xirc0m » Tue Jul 05, 2005 5:47 pm

**LATEST UPDATE**


Image

Megane II ( 2.0 l engine) with installed the BMC-CDA Filter (2.0l BMC-CDA filer version)...... note the battery has been removed....and placed on the rear boot....

Image
The man of knowledge must be able not only to love his enemies but also to hate his friends.

Friedrich Nietzsche (1844 - 1900)



Image
Top
User avatar
ktlk
Passed Theory
Posts: 43
Joined: Fri Jun 10, 2005 9:16 am
Location: Athens-Greece
Contact:
Contact ktlk

Postby ktlk » Mon Aug 01, 2005 10:39 pm

I've got the bmc cda on my 1,4 and its the best...
I used the induction kit by simota and it's look perfect
Image
I'm the Lizzard King
I can do anything
Image
Top
abemax
Passed Theory
Posts: 31
Joined: Mon Jul 25, 2005 7:01 pm
Location: Italy

Postby abemax » Wed Aug 03, 2005 6:41 pm

hi everybody
i've noticed that someone installed the BMC-cda model for 1,6 l on Megane II 2,0 l
I would install it on mine 2,0 l because I do not want to remove the battery.
Could anyone explain the benefit of this filter ?
Do you suggest me to try it ?

At the time being I have K&N in the original air-box but I read worst impression of that !!
Top
ado
Advanced Driver
Posts: 635
Joined: Thu Mar 24, 2005 1:00 pm
Location: Gloucestershire
Contact:
Contact ado

Postby ado » Mon Sep 19, 2005 6:18 pm

I want to fit an induction kit to my Megane but there isn't one for the 1.5dci. I have been told that the BMC CDA for the 1.6 should fit, is this correct? I would like to find out before I go for it.
Racing Blue 197 with Climate, Xenons, Sunroof, electric folding mirrors and Milltek sport exhaust. Now at dealer.
Top
User avatar
ktlk
Passed Theory
Posts: 43
Joined: Fri Jun 10, 2005 9:16 am
Location: Athens-Greece
Contact:
Contact ktlk

Postby ktlk » Tue Sep 20, 2005 12:02 am

The bmc that I use is from type-R;;;Is 150/70 instead 130/70 that bmv suggest for 1.6...For 1,4 that I Have bmc suggest only one free filter inside the original airbox
I'm the Lizzard King

I can do anything

Image
Top
ado
Advanced Driver
Posts: 635
Joined: Thu Mar 24, 2005 1:00 pm
Location: Gloucestershire
Contact:
Contact ado

Postby ado » Wed Sep 21, 2005 4:09 pm

Sorry for asking this but I was wondering how do I get the original airbox out? I think it is the same as the 1.6. Do I have to take out the battery?
Racing Blue 197 with Climate, Xenons, Sunroof, electric folding mirrors and Milltek sport exhaust. Now at dealer.
Top
User avatar
hannson
Advanced Driver
Posts: 410
Joined: Mon Apr 18, 2005 3:23 pm
Location: Singapore

Postby hannson » Sun Sep 25, 2005 9:38 am

ktlk wrote:I've got the bmc cda on my 1,4 and its the best...
I used the induction kit by simota and it's look perfect
u mean u u're using the CDA in combination with the Simota Induction kit?

do you have the photo of your Simota induction kit?
Image
Top
Post Reply

Return to “Modifications”

Who is online

Users browsing this forum: Google Adsense [Bot] and 20 guests