Help With Retrofit Cruise Control - Got My Resistors

[seanog5]

Hi Guys

i have been reading and posting in the other cruise control threads, but i am asking too many questions in those so thought it best to start my own thread!

i have ordered the CC/SL Switch £10.57! bargain!

got 3 resistors from maplin,

i have a 900ohm - white, brown, black, black, brown = 9,1,0,0,1
i have a 270ohm - red, violet, black, black, brown = 2,7,0,0,1
i have a 100ohm - brown, black, black, green, brown = 1,0,0,5,1

is this right?

going to be using my existing steering wheel controller unit so will need to wire it to show the + and - right - will be using the german forum guide

does it matter which way round i connect to the 2 under wheel cables? or does polarity not matter?

regards

Sean

[joeishmather]

German guide... After I went to all that trouble!lol

The 2 wires can go either way round, it makes the circuit up and there's no polarity issue..

[seanog5]

its going to be a hybrid, your type of wiring (but the right way round) haha

bloody good write up by the lot of you!

going to do it wednesday / thursday when the switch lands, or might get the hard wired stuff in tomorrow if i can and then just pop the switch in at the dealers and try to drive home on CC!!

i will be so happy if this works!

[Gibzy]

As with the issue that im having, have you located the wiring behind the fasia panerl for the CC hookup. If it aint there, you cant install it

[seanog5]

first thing i did before leaving for town today matey

its there, so all good

[seanog5]

done the radio controller and wired it all up

just got to install the switch tomorrow when it arrives

i will either be over the moon on the way home from the dealer tomorrow or totally peed off!

[seanog5]

done it!

bloody so happy and thanks to all the guides on this forum and others

you have made my driving so much better