1.6 exhaust

[peteboy]

hello

can anybody help me and tell me were i could get an exhaust to fit my car but i want it like on the 225 with the twin exit in the center?? and if anyone has got 1 are they any good??and if anyone has got any pix if possible

thank you
pete

[R55VYS]

if your keeping your std back bumper it will need chopping abit so the exhaust will fit. Any exhaust place will make you a stainless backbox like a 225 style one will cost you about £200-£300. or buy a miltek backbox for the 225 and get it fitted as this is about same price as getting one made and it is a quality product. or you could hunt thru ebay scrap yards other megane forums for a second hand 225/r26 backbox and get that fitted, will give you a slightly deeper note, still pretty quiet like.

[R55VYS]

if your after getting one made try powerflow, exhausts Uk or go on yell.com and search exhaust places near you, there will be alot of places that will make you one, although it is a bitch to make the 225 style exhaust as the space is very tight to get a twin pipe joint and bend into, especially on the standard bumper as there is more of a void on the 225 bumper, alternatively you could look into the gt exhaust there twin center exit to on a stnd bumper with a little black plastic trim to make it look neat

[peteboy]

cheers mate

will a gt exhaust be a straight fit onto mine from the cat back??

cheers pete

[R55VYS]

not sure mate, i know the 225 doesnt fit because there is a different fitment on the cat. but all you need is the backbox would be cheaper, or if you get the full system just fit the backbox.

[Oliver]

You can get it fitted also on a 1,6l cat without welding, sure, some adaptors necessary, but it works...













    
https://de.youtube.com/watch?v=Ub7VtUXjlfc


Or you do some welding like I did, and cut off the f***** double pipes....





I welded the also the front part to of the Megane RS down-pipe on my cat, cause I wanted to fit this head, but up to now it didn´t work...







    
https://www.youtube.com/watch?v=kr2JGVwWd_c

[hadzry]

if your keeping your std back bumper it will need chopping abit so the exhaust will fit. Any exhaust place will make you a stainless backbox like a 225 style one will cost you about £200-£300. or buy a miltek backbox for the 225 and get it fitted as this is about same price as getting one made and it is a quality product. or you could hunt thru ebay scrap yards other megane forums for a second hand 225/r26 backbox and get that fitted, will give you a slightly deeper note, still pretty quiet like.

hi mate..
i have 225 bumper on and would like to install miltek/powerflow for the 225 but only from backbox to the twin tips..
can i really get this thing from either both company..?
how much will this set me back..?