My new Angel eyes headlights, now mounted (Phase 1)

[TheFinn]

Usually it's just a matter of locating the adjuster rod's ball end in the equivalent "cup" in the headlight, then attaching the adjuster's body to the headlight by pushing in and twisting. It's the (kind of) same sort of bayonet fitting as rear light bulbs have.

I had some Chinese-made headlights on my Twingo, they had a design flaw where the travel of the original adjuster wasn't sufficient, they always pointed too low even if I wound the adjustment screws to the max upward. These AAs for the Megane are designed better in that respect?

[TJM]

Here is my raid angel eyes chrome:

[Steel]

Here is my raid angel eyes chrome:

Looks nice, no angeleyes lit ?

[hannson]

is it pointing the right/wrong way?

[Basenji]

A panzerkampfwagen ?
Zdrówko

[MrAsia]

any photos of it at night beside a wall and projecting onto a wall?
Just want to see the cutoff and distance they project

[abemax]

Does anybody like mine ??

[000KMCGP]

they are cool , i have no idea which kit to buy ? , the installer i found is a novice and is scared , got any pix of install or procedeure?
and which kit is best for my sedan megane II , grey - how do i get a blue look ?


thx in adv

[McLaren]

How hard are they to install is it just a case of take old headlights out and swap are to you have to mess about with wires?
Thanks yea my 100post on hear

[Brownsome]

They look well dude. seen some on ebay for 150 bar a while back

[chrissallison]

fitted mine last week but cant get halos to light up on their own work ok with angel eyes

[chewbacker]

normaly with headlights like these there very simply to fit but may not work exactly how you want e.g halo's on all the time.
this is because the makers have to cover there backside incase you are breaking the law by doing this.
daytime running lights which if you have them on all the time is what they will be classed as must dim down when dipped beam is turned on and which ever side indicater is used that drl must dim while indicater is in use. this normaly means a very expensive control box.
if you want them to work like standard lights they should be great from the box