do the DCi's have them? my car is showing up a 01648 fault on the diagnostics.
on looking on the net it looks like this fault is actualy P0164 which is a lambda fault apparently.
DCi-Lambda Sensor??
Moderators: q292u, Ray, AndyAdmin, Stranger
DCi-Lambda Sensor??
DCi 120 for sale, 52,000 miles, £3250 ono
-
IainMW
- F1 Driver
- Posts: 1549
- Joined: Thu Oct 20, 2005 5:48 pm
- Currently Drives:: Laguna III 2.0dCi 150 Dynamique Hatchback. Pearl Black, Panoramic Sunroof, Front & Rear Proximity Sensors, 17" Spider Alloys (with B****y expensive tyres on!)
- Location: In the Foot Hills of the Valley of the Pie Eaters!
Not sure on that one but I suspect they will have exhuast gas monitoring sensors.
The ECU will monitor oxygen in the exhaust. (I think?
)
Are you sure the two faults are the same?
The ECU will monitor oxygen in the exhaust. (I think?
)
Are you sure the two faults are the same?
Make improvements, not excuses!
Laguna III 2.0dCi 150 Dynamique Hatch. Pearl Black, Panoramic Sunroof, Front & Rear Proximity Sensors, 17" Spider Alloys (with B****y expensive tyres fitted!)
Laguna III 2.0dCi 150 Dynamique Hatch. Pearl Black, Panoramic Sunroof, Front & Rear Proximity Sensors, 17" Spider Alloys (with B****y expensive tyres fitted!)
apparently its not actually that, the fault code is actually P01648 and is CAN-bus failure/malfunction...apparently It relates to general EODBII "P1" codes (They're not shown in Autodata) and the "CAN-Bus" is the interface used in all new Renaults for the ECU to gather info from all the various sensors around the car.
still confused
still confused
DCi 120 for sale, 52,000 miles, £3250 ono
Return to “Problems / Questions”
Who is online
Users browsing this forum: No registered users and 94 guests