Bye bye honeycomb dash. Hello Dinoc carbon.

For all stuff related to modifying your car

Moderators: q292u, Ray, AndyAdmin, Stranger

Diffbuster
Posts: 7
Joined: Sun Apr 17, 2011 9:46 am
Currently Drives:: 2004 Megane Dynamique 1.5dCi. 3 door. 80hp
Location: County Antrim. Northern Ireland
Contact:

Bye bye honeycomb dash. Hello Dinoc carbon.

Postby Diffbuster » Wed Jun 29, 2011 9:15 pm

The one thing that I didn't like about the interior of my car was that honeycomb effect on the dash centre unit.
So I had to do something about it. I also done the gear knob, as the numbers were partially worn off

Image

I wanted to do the speedo surrounds aswell but they look like a nightmare to remove from the fascia without doing some sort of damage, as I discovered they are kinda welded together. I could probably drill out the welds and bond it back on. Has anyone done this.
My car may not be quick. But I rarely see the pumps. And I'm laughing all the way to the post office to pay my road tax.

peter h
Just Passed
Posts: 106
Joined: Thu Apr 28, 2011 10:32 am
Currently Drives:: Renault Megane 1.6 VVT Dynamique Auto

Re: Bye bye honeycomb dash. Hello Dinoc carbon.

Postby peter h » Fri Jul 01, 2011 2:11 pm

want to do this with mine.

are all the dials attached the the panel ?

have you got a picture of whats behind that lot?

AndyWardle
Posts: 5
Joined: Fri Jul 22, 2011 12:52 pm
Currently Drives:: 2003 Renault Megane 1.5dCi

Re: Bye bye honeycomb dash. Hello Dinoc carbon.

Postby AndyWardle » Wed Jul 27, 2011 6:25 pm

Where did you find this???? I want it haha! And I agree with ya statement, 1.5dCi's may not be fast but damn they are cheap lol!

Gapi
Posts: 2
Joined: Sun Jul 31, 2011 5:19 pm
Currently Drives:: Renaul Megane II 1.6 16v

Re: Bye bye honeycomb dash. Hello Dinoc carbon.

Postby Gapi » Sun Jul 31, 2011 6:18 pm

Hello. Can you help me and tell me how did you get off the button on gear knob?

Thanks,

Gasper

j.agbodo92
Posts: 4
Joined: Sat Feb 19, 2011 12:50 pm
Currently Drives:: 2003 renault megane 225 sport Replica
Location: Northern Ireland/belfast

Re: Bye bye honeycomb dash. Hello Dinoc carbon.

Postby j.agbodo92 » Thu Nov 24, 2011 6:07 pm

hey, looking to wrap my center dash, already started with the gear knob. just dont know what size sheet i would need for the dash, what size did you get and how much if you dont mnd me asking?

paulhick
Posts: 12
Joined: Wed Dec 14, 2011 6:47 pm

Re: Bye bye honeycomb dash. Hello Dinoc carbon.

Postby paulhick » Sun Feb 05, 2012 11:19 am

how do you get the wrap to go around the heater recesses without wrinkling?

paulhick
Posts: 12
Joined: Wed Dec 14, 2011 6:47 pm

Re: Bye bye honeycomb dash. Hello Dinoc carbon.

Postby paulhick » Sun Feb 05, 2012 11:51 am

Eddie- wrote:
paulhick wrote:how do you get the wrap to go around the heater recesses without wrinkling?

heat gun or hair dryer will do the trick

cheers for the quick reply,have got some wrap on order so will be attempting this next weekend.

paulhick
Posts: 12
Joined: Wed Dec 14, 2011 6:47 pm

Re: Bye bye honeycomb dash. Hello Dinoc carbon.

Postby paulhick » Sun Feb 05, 2012 3:21 pm

another quick question-
how do i remove this panel?


Return to “Modifications”

Who is online

Users browsing this forum: No registered users and 14 guests