The one thing that I didn't like about the interior of my car was that honeycomb effect on the dash centre unit.
So I had to do something about it. I also done the gear knob, as the numbers were partially worn off
I wanted to do the speedo surrounds aswell but they look like a nightmare to remove from the fascia without doing some sort of damage, as I discovered they are kinda welded together. I could probably drill out the welds and bond it back on. Has anyone done this.
Bye bye honeycomb dash. Hello Dinoc carbon.
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Posts: 7
- Joined: Sun Apr 17, 2011 9:46 am
- Currently Drives:: 2004 Megane Dynamique 1.5dCi. 3 door. 80hp
- Location: County Antrim. Northern Ireland
- Contact:
Bye bye honeycomb dash. Hello Dinoc carbon.
My car may not be quick. But I rarely see the pumps. And I'm laughing all the way to the post office to pay my road tax.
-
- Just Passed
- Posts: 106
- Joined: Thu Apr 28, 2011 10:32 am
- Currently Drives:: Renault Megane 1.6 VVT Dynamique Auto
Re: Bye bye honeycomb dash. Hello Dinoc carbon.
want to do this with mine.
are all the dials attached the the panel ?
have you got a picture of whats behind that lot?
are all the dials attached the the panel ?
have you got a picture of whats behind that lot?
-
- Posts: 5
- Joined: Fri Jul 22, 2011 12:52 pm
- Currently Drives:: 2003 Renault Megane 1.5dCi
Re: Bye bye honeycomb dash. Hello Dinoc carbon.
Where did you find this???? I want it haha! And I agree with ya statement, 1.5dCi's may not be fast but damn they are cheap lol!
Re: Bye bye honeycomb dash. Hello Dinoc carbon.
Hello. Can you help me and tell me how did you get off the button on gear knob?
Thanks,
Gasper
Thanks,
Gasper
-
- Posts: 4
- Joined: Sat Feb 19, 2011 12:50 pm
- Currently Drives:: 2003 renault megane 225 sport Replica
- Location: Northern Ireland/belfast
Re: Bye bye honeycomb dash. Hello Dinoc carbon.
hey, looking to wrap my center dash, already started with the gear knob. just dont know what size sheet i would need for the dash, what size did you get and how much if you dont mnd me asking?
Re: Bye bye honeycomb dash. Hello Dinoc carbon.
how do you get the wrap to go around the heater recesses without wrinkling?
Re: Bye bye honeycomb dash. Hello Dinoc carbon.
Eddie- wrote:paulhick wrote:how do you get the wrap to go around the heater recesses without wrinkling?
heat gun or hair dryer will do the trick
cheers for the quick reply,have got some wrap on order so will be attempting this next weekend.
Re: Bye bye honeycomb dash. Hello Dinoc carbon.
another quick question-
how do i remove this panel?
how do i remove this panel?
Who is online
Users browsing this forum: No registered users and 36 guests