The Mégane II Owners' Club

How to disassemble centre console to remove silvery plastic panel surrounding buttons?

Somebody? Anybody?!

Hi mate right take the bottom pannel off
where the OBDII socket is theres 2 screws there take them out
Then pull the pannel towards you being very carefull

steve

Steve, isn't there 2 behind the radio too?
Between radio/changer or radio/pocket depending on model
Steve

So, There are 2+4+2 bolts of plastic panel surrounding buttons.
I understand that I have to remove plastic cover of OBDII socket to unscrew 2 bolts of the plastic panel and to unscrew 4 bolts of radio unit to get to unscrew 4 bolts of the plastic panel.
But I do not understand how to get to unscrew 2 bolts of the plastic panel behind central air vents.

There must be some better explanation.

Similar to Renault Mégane Scénic II?

Sorry I dont know but how come you got a nice satnav? Not fair

can't touch this vrm vrm-vrm-vrm sexy time.

As usual I will answer my own question.



I deserve advanced rank.

I think you just did what was suggested. Bonus points for quoting the manual though!

A picture is worth a thousand words.

Speaking of interior does anybody know if I can and where I can find color codes for inerior silver and beige for Renault Mégane II Phase I?

SHH!