Page 1 of 1

Alloy fitment

Posted: Sun Feb 22, 2009 10:53 am
by jayg8800
Will alloys from a 53 plate clio fit a 2004 1.4 megane?

ive checked the internet for fitment and its telling me that a megane is pcd 4x100 and the offset is 35-42, and according the the same website the clio matches this.

Can any1 help me pleaseeee

Re: Alloy fitment

Posted: Mon Feb 23, 2009 4:05 pm
by TheFinn
Yes they fit the 1.4 (259mm front brakes as in the Clio) but not necessarily the bigger-engined Meganes (280mm front brakes).

The Megane offset is actually 45-49, but anything down to 25 fits if you don't go with a tyre over 205mm wide.

Re: Alloy fitment

Posted: Mon Feb 23, 2009 8:58 pm
by tallpaul
the lower offset pushes the wheel further out right?

Re: Alloy fitment

Posted: Tue Feb 24, 2009 8:44 pm
by TheFinn
Right.