Page 1 of 1
What model of 16' alloy?
Posted: Tue Aug 10, 2010 8:35 am
by pomtraveloap
Have just purchased a Megane II (Privilege 2007 1.6 VVT). One of the alloys is badly scuffed with slight dent.
Will be looking for a good replacement but unsure of model of alloy. Can anyone help?
Re: What model of 16' alloy?
Posted: Tue Aug 10, 2010 11:34 am
by DragTheLake
i do believe they are called "nervasport" if you search Renault Alloys on e bay just look for the one you need
i hope that shed some light
Bobby
Re: What model of 16' alloy?
Posted: Tue Aug 10, 2010 11:41 am
by direstraits
Re: What model of 16' alloy?
Posted: Tue Aug 10, 2010 12:08 pm
by DragTheLake
i stand corrected
Re: What model of 16' alloy?
Posted: Tue Aug 10, 2010 3:14 pm
by Paddy
Yea its a Kubera. The Neversport was a 17" wheel from the phase one.
Re: What model of 16' alloy?
Posted: Tue Aug 10, 2010 6:37 pm
by pomtraveloap
Dear direstrates.Thanks for the reply. They are not the ones a shown. Perhaps they are ones as fitted in Denmark. I am trying to find a way of adding a photograph. Us silver surfers are lagging a little.
Re: What model of 16' alloy?
Posted: Tue Aug 10, 2010 6:57 pm
by direstraits
Re: What model of 16' alloy?
Posted: Tue Aug 10, 2010 7:05 pm
by Paddy
pomtraveloap wrote:Dear direstrates.Thanks for the reply. They are not the ones a shown. Perhaps they are ones as fitted in Denmark. I am trying to find a way of adding a photograph. Us silver surfers are lagging a little.
To add a photo....
Open up a
https://www.photobucket.com account.
Upload your photo to there.
You wll then be provided with an [IMG] code/web link.
Copy and paste that link into your forum post and your image will be displayed.
A guide can be found in the F&Q section.
On another note i don’t get the 'silver surfer techno debate' If your generation was able to go to the moon on a glorified calculator this modern day internet should be a doddle!!!
Regards
P
Re: What model of 16' alloy?
Posted: Wed Aug 11, 2010 2:12 pm
by pomtraveloap
Many thanks for the guide, here is the photo of the alloy style;

ulrich100 wrote:On another note i don’t get the 'silver surfer techno debate' If your generation was able to go to the moon on a glorified calculator this modern day internet should be a doddle!!!
It takes us silver surfers' longer but we get there in the end (well with a bit of help from my son-in-law).
Thanks for the help - Pomtraveloap
Re: What model of 16' alloy?
Posted: Wed Aug 11, 2010 2:25 pm
by steve-t
Those are "CURACAO" alloys
Steve
Re: What model of 16' alloy?
Posted: Wed Aug 11, 2010 10:48 pm
by Paddy
Yea there were only avaliable on the top end privilage model.