for the multiplay CD?
which is different to the radio.....
also, should the wiring be so tight?????? i can only just get the radio out enough to get half the wiring disconnected, but struggling to get the white ones unplugged
removal tool?
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Passed Theory
- Posts: 34
- Joined: Tue Jun 21, 2016 9:29 pm
- Currently Drives:: kia Optima
Citroen C3 Pluriel
Renault Megane CC
-
- Advanced Driver
- Posts: 684
- Joined: Wed Apr 15, 2009 9:57 am
- Currently Drives:: Megane CC 1.9Dci and a Pugeot 307 cc 2.0 HDi sport.
- Location: Wales
- Contact:
Re: removal tool?
Its a flat blade that comes to a point on one side you will have to pop out cd changer to get enough cable play. Radio is a pig to get back in. Pull out cd player so you get hand in cd slot to manoeuvre cables for radio then push cd player home again that is quite tight but not as bad as radio. Beaware cd changer has a code if you loose power from it you will have to input it.
Cables get caught behind the rubber bung on the radio stopping it mounting into its hole in back of dash.
Cables get caught behind the rubber bung on the radio stopping it mounting into its hole in back of dash.
Who is online
Users browsing this forum: No registered users and 43 guests