My Megane CC RS Replica Project
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Learner Driver
- Posts: 64
- Joined: Tue May 25, 2010 8:19 pm
- Currently Drives:: Renault Megane Dynamique
Renault Clio Expression
My Megane CC RS Replica Project
January 2012
This is Pretty much what it looked like the day I picked it up, Standard, with the Keyless Entry and Start , Leather Interior
Carbon Fibre Wrapped the Front and Back Badge and Fitted Private Plate Slightly Visible in Picture
Angel Eyes , Bargain Buy cost me about £25 just had to rewire them , was not difficult at all
Night Time Angel Eyes , The Flash makes them look less bright, next time I will turn the flash off LOL
Shortly followed by fitted the same afternoon
Megane 225 Front Bumper and Grill , As well as the Roof Carbon Fibre Wrapped
Megane 225 Rear Bumper Fitted and Painted
May 22nd Went Shopping with a Mate Came Back with a Megane CC for Him Lol,
After a Month of Modifications this is his and mine, at this point I had had a Custom exhaust made from a 225 Exhaust, This Exhaust is fully piped in and works.
Still Needs some Alloys so I brought Some BK Racing 17 Inchs but need painting so still sitting in Garage will get round these eventually.
The Grey Paint Job seemed a little boring and did not stand out from the crowd, So I fancied somthing a little differnet so I saved me pennys and make a massive Change
Rolled Up to Spray Garage, with a Mate got out Walked through car park straight in the office, Me:Hi Mate , Des Garage Man: What you think of it, its came out really nice. Me: I have not seen it where is it, Des Garage Man: It must look different if you didnt see it. At this point I run outside
First Time I saw it OMG OMG OMG
Get in
Well Happy
Full Respray in Pearl White , Door Handles Colour Coded
Rear Boot Debadged, Megane 225 Rear Grills Fitted , Rear Tow Eye Smoothed, Rear Number Plate Holder Sprayed Black.
Also Fitted Classic Pressed Plates can be seen on front not on back picture as it was raining when I finished.
This is Pretty much what it looked like the day I picked it up, Standard, with the Keyless Entry and Start , Leather Interior
Carbon Fibre Wrapped the Front and Back Badge and Fitted Private Plate Slightly Visible in Picture
Angel Eyes , Bargain Buy cost me about £25 just had to rewire them , was not difficult at all
Night Time Angel Eyes , The Flash makes them look less bright, next time I will turn the flash off LOL
Shortly followed by fitted the same afternoon
Megane 225 Front Bumper and Grill , As well as the Roof Carbon Fibre Wrapped
Megane 225 Rear Bumper Fitted and Painted
May 22nd Went Shopping with a Mate Came Back with a Megane CC for Him Lol,
After a Month of Modifications this is his and mine, at this point I had had a Custom exhaust made from a 225 Exhaust, This Exhaust is fully piped in and works.
Still Needs some Alloys so I brought Some BK Racing 17 Inchs but need painting so still sitting in Garage will get round these eventually.
The Grey Paint Job seemed a little boring and did not stand out from the crowd, So I fancied somthing a little differnet so I saved me pennys and make a massive Change
Rolled Up to Spray Garage, with a Mate got out Walked through car park straight in the office, Me:Hi Mate , Des Garage Man: What you think of it, its came out really nice. Me: I have not seen it where is it, Des Garage Man: It must look different if you didnt see it. At this point I run outside
First Time I saw it OMG OMG OMG
Get in
Well Happy
Full Respray in Pearl White , Door Handles Colour Coded
Rear Boot Debadged, Megane 225 Rear Grills Fitted , Rear Tow Eye Smoothed, Rear Number Plate Holder Sprayed Black.
Also Fitted Classic Pressed Plates can be seen on front not on back picture as it was raining when I finished.
-
- Rally Driver
- Posts: 1118
- Joined: Thu Oct 18, 2012 6:08 pm
- Currently Drives:: Megane convertible 1.9dci 2006
Re: My Megane CC RS Replica Project
the rear bumper really finishes it
-
- Learner Driver
- Posts: 64
- Joined: Tue May 25, 2010 8:19 pm
- Currently Drives:: Renault Megane Dynamique
Renault Clio Expression
Re: My Megane CC RS Replica Project
Day time running lights how boring , these bad boys turn on when the car is unlocked or the doors are opened
They also flash to the beat of music or flash on and off with the controller I wired in
And another
New stereo with stalk adapter
Also plays DVD , mp3 and can control iphone and songs without touching phone
Import contact list and Siri compatible
-
- Learner Driver
- Posts: 64
- Joined: Tue May 25, 2010 8:19 pm
- Currently Drives:: Renault Megane Dynamique
Renault Clio Expression
Re: My Megane CC RS Replica Project
Wheels Suggestions Please.
Must be around 19 to 20 inches
Going to have a adapter kit made to fit 5 stud
Must be around 19 to 20 inches
Going to have a adapter kit made to fit 5 stud
- almcgrail
- Pass Plus
- Posts: 194
- Joined: Thu Oct 06, 2011 8:54 pm
- Currently Drives:: Megane II tourer 130
Re: My Megane CC RS Replica Project
19" bbs lm,
genuine or replica,staggered widths, stretch tyres, sorted!
Or H n R adapters 4x100 t0 5x130 then: https://www.ebay.co.uk/itm/19-PORSCHE-BO ... 460dac3efa
genuine or replica,staggered widths, stretch tyres, sorted!
Or H n R adapters 4x100 t0 5x130 then: https://www.ebay.co.uk/itm/19-PORSCHE-BO ... 460dac3efa
-
- Learner Driver
- Posts: 64
- Joined: Tue May 25, 2010 8:19 pm
- Currently Drives:: Renault Megane Dynamique
Renault Clio Expression
Re: My Megane CC RS Replica Project
They look nice.
Any ideas where to buy the stud adapters
Cheapest quote have had us 250 for a adapters
Any ideas where to buy the stud adapters
Cheapest quote have had us 250 for a adapters
- almcgrail
- Pass Plus
- Posts: 194
- Joined: Thu Oct 06, 2011 8:54 pm
- Currently Drives:: Megane II tourer 130
Re: My Megane CC RS Replica Project
Adapters are available from larkspeed or venom motorsport and about 250 will get you all 4.
You may be able to get a cheaper brand, but like they said to me when I bought mine it could cost you your life; fair point.
If you went for the Porsche reps they are high offset and fairly wide so with the adapters should really fill out the massive arches but not protrude them.
You may be able to get a cheaper brand, but like they said to me when I bought mine it could cost you your life; fair point.
If you went for the Porsche reps they are high offset and fairly wide so with the adapters should really fill out the massive arches but not protrude them.
-
- Learner Driver
- Posts: 64
- Joined: Tue May 25, 2010 8:19 pm
- Currently Drives:: Renault Megane Dynamique
Renault Clio Expression
Re: My Megane CC RS Replica Project
I was thinking deep dish black alloys like the lambo gallardo
Or may move see if a set of 20 inch range rovers will go on
Any other rim suggestions mate ,
Gonna order so Jom coilovers end of April wanna drop it 80mm all way round if that possible
You seem to know a lot more then me on coilovers and wheels adapter
So appreciate the help
Or may move see if a set of 20 inch range rovers will go on
Any other rim suggestions mate ,
Gonna order so Jom coilovers end of April wanna drop it 80mm all way round if that possible
You seem to know a lot more then me on coilovers and wheels adapter
So appreciate the help
- almcgrail
- Pass Plus
- Posts: 194
- Joined: Thu Oct 06, 2011 8:54 pm
- Currently Drives:: Megane II tourer 130
Re: My Megane CC RS Replica Project
If it were me I'd stick to porsche or aftermarket porsche rims, its the safest bet as all the parts you need are off the shelf. If you go for range rover or lambo rims you'd probably have to get some adapters made up and due to the lower offsets on these wheels they would stick out a mile; I'm not saying it cant be done but the calculations for the porsche set up are fairly easy, and depending on the width of hub adapter you'll get flush with the arches or even reasonable poke with a bit of stretch tyre.
Ebay 19" and 20" porsche alloys, genuine or aftermarket, but look out for the mega wide rears as they might be too wide.
Car looks mint by the way.
Ebay 19" and 20" porsche alloys, genuine or aftermarket, but look out for the mega wide rears as they might be too wide.
Car looks mint by the way.
-
- Posts: 3
- Joined: Sun Jun 30, 2013 5:29 pm
Re: My Megane CC RS Replica Project
hi,
so porshe 19" rims have right offset etc, just require adapters? have you got any links for further info?
cheers
Ed
so porshe 19" rims have right offset etc, just require adapters? have you got any links for further info?
cheers
Ed
-
- Posts: 13
- Joined: Sun Jul 21, 2013 2:39 pm
- Currently Drives:: Renault Megan Mk II 1.9 Dci Coupe Convertible (Black)
Re: My Megane CC RS Replica Project
very nice, love it in white.
Where did the bumpers come from and what set up is the exhaust now? Noticed it is twin pipe, not the usual single
Where did the bumpers come from and what set up is the exhaust now? Noticed it is twin pipe, not the usual single
-
- Learner Driver
- Posts: 75
- Joined: Thu Aug 05, 2010 2:52 pm
- Currently Drives:: 2004 Renault Megane 1.5 Dci 80
- Location: Newcastle
- Contact:
Re: My Megane CC RS Replica Project
how hard was it to find the rear bumper?
and what headunit is that?
and what headunit is that?
-
- F1 Driver
- Posts: 1689
- Joined: Wed Nov 25, 2009 3:22 pm
- Currently Drives:: 57 megane with roof, engine, wheels, doors... All the usual things.
- Location: Sheffield
Re: My Megane CC RS Replica Project
DragTheLake wrote:how hard was it to find the rear bumper?
and what headunit is that?
There is a rear 225 style bumper for a cc on ebay atm I think..
Who is online
Users browsing this forum: No registered users and 15 guests