Wheel Sizes

[MartyW]

Does anyone know the stud diameter, offset etc for getting aftermarket wheels for the megane CC

thanks in advance

[ChrisM]

I am going to watch this post! I belive stud dia (PCD) is 4 x 100, offest you seem to get a range 35 - 38, centre bore is 60mm can't find anything specific to the CC or any other Meg 2 really for offset, I looked at the inside of my wheels and there is no mention of offset or ET as it is sometimes marked on wheels even though they are OE alloys, I belive Puma Wheels or most VW wheels (aftermarket) will fit as you can change the spigot rings, also been lead to belive to be carefull with OZ wheels as spigot rings for them are very difficult to find.
It is a bit of a closed world are alloys I belive aftermarket have larger centre bores and it is the spigot ring that makes it fit your car, so I supose in Theory any wheel within the 35-38 mark for offset and has a 4 stud PCD of 100 (most cars seem to on 4 stud) All seems a bit hit and miss to me don't know enough about it to gamble on a set of VW wheels or the like and get stuck with them, or worse sell em on at a loss.