Fitting a towbar (electrics)

The section for all Megane III talk.

Moderators: q292u, Ray, AndyAdmin, Stranger

diff
Posts: 1
Joined: Wed Mar 27, 2019 8:16 am
Currently Drives:: Mégane MK3

Fitting a towbar (electrics)

Postby diff » Wed Mar 27, 2019 8:30 am

Hi,

I am trying to fit towbar to a mk 3 Mégane (2011 1.6 dynamique sat nav).

I am trying to work out the neatest place to pick up the light signals & install the bypass relay.

I found two connectors to the wiring in the compartment behind the rear light cluster (on the left hand side of the boot). Does anyone know what the pins/wires are on these connectors is?

bond68
Posts: 8
Joined: Thu Jan 08, 2015 9:30 am
Currently Drives:: megane 1.5cdi- mazda mx5-Bond Equipe

Re: Fitting a towbar (electrics)

Postby bond68 » Fri Nov 08, 2019 8:48 pm

Hi
Any joy finding out what those connectors were?

IceCoffee
Posts: 1
Joined: Tue Nov 12, 2019 4:26 am
Currently Drives:: Scenic 3

Re: Fitting a towbar (electrics)

Postby IceCoffee » Tue Nov 12, 2019 4:36 am

If I get a chance I will post back with more detailed info tomorrow, but if it's anything like the scenic 3 (which it normally is) there is 1 heavy duty permanent live cable ran to each of the rear clusters (along with a heavy duty ground) and then a little signal wire to activate the brake light and another signal for the indicator. I guess the answer would be to use relays.


Return to “Megane III”

Who is online

Users browsing this forum: No registered users and 2 guests