Hi,
Anybody tell me which colour the wire is for the reversing light? I'm fitting parking sensors and I need to splice a feed from the sensor box into the reverse light wire. Any help would be greatly appreciated. I'm having a ' mare. Thanks!!
Reverse light Wiring Colour
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- F1 Driver
- Posts: 1957
- Joined: Sat Aug 23, 2008 5:22 pm
- Currently Drives:: Megane Saloon 2.0 VVT Dynamique
- Location: Belfast, Northern Ireland
- Contact:
Re: Reverse light Wiring Colour
Cant you just take out the rear cluster and have a look?
or take it from the feed from the rear cluster?
or take it from the feed from the rear cluster?
Re: Reverse light Wiring Colour
Ulrich,
Thanks for the reply, however the sensors need to be wired to the reverse light so that they only activate when you put the car in reverse(i.e they only get power when the reverse light illuminates). i hope this makes sense and would appreciate if anyone can give me the heads up.
Thanks again
Thanks for the reply, however the sensors need to be wired to the reverse light so that they only activate when you put the car in reverse(i.e they only get power when the reverse light illuminates). i hope this makes sense and would appreciate if anyone can give me the heads up.
Thanks again
-
- Just Passed
- Posts: 139
- Joined: Sat Jul 26, 2008 1:11 pm
- Currently Drives:: Mégane II Ph.1 1.6 16v Dynamique Luxe, full leather seats, Carminat Informé 1 with CD-changer.
Re: Reverse light Wiring Colour
According to several forums:
In the black connector: Right side (driver side): pin 2, left side: pin 3.
In the black connector: Right side (driver side): pin 2, left side: pin 3.
From Holland! Megane II Phase 1, Black Pearl, 1.6 16V LPG, Dynamique Luxe, full leather, Carminat 1 with CD-changer, Phase 2 front.
Re: Reverse light Wiring Colour
KJ,
You are a star! Thanks very much
You are a star! Thanks very much
-
- F1 Driver
- Posts: 1957
- Joined: Sat Aug 23, 2008 5:22 pm
- Currently Drives:: Megane Saloon 2.0 VVT Dynamique
- Location: Belfast, Northern Ireland
- Contact:
Re: Reverse light Wiring Colour
You can still take from the cluster... Just trace from the reverse bulb to the correct wires....
-
- Just Passed
- Posts: 139
- Joined: Sat Jul 26, 2008 1:11 pm
- Currently Drives:: Mégane II Ph.1 1.6 16v Dynamique Luxe, full leather seats, Carminat Informé 1 with CD-changer.
Re: Reverse light Wiring Colour
The black connector connects to the cluster! You can't open the cluster, so the connector is the easiest way to connect your wire to.
From Holland! Megane II Phase 1, Black Pearl, 1.6 16V LPG, Dynamique Luxe, full leather, Carminat 1 with CD-changer, Phase 2 front.
Re: Reverse light Wiring Colour
Thanks for all your help KJ and
Ulrich. I just used scotch lock clips to terminal 2(reverse light) and terminal 5(ground) on the driver side(offside). Thanks again!!!
Ulrich. I just used scotch lock clips to terminal 2(reverse light) and terminal 5(ground) on the driver side(offside). Thanks again!!!
Who is online
Users browsing this forum: No registered users and 22 guests