Reverse light Wiring Colour

Discussions on the Megane II sedan

Moderators: q292u, Ray, AndyAdmin, Stranger

chavva
Posts: 10
Joined: Wed Jul 08, 2009 1:35 pm

Reverse light Wiring Colour

Postby chavva » Fri Jul 31, 2009 2:09 pm

Hi,
Anybody tell me which colour the wire is for the reversing light? I'm fitting parking sensors and I need to splice a feed from the sensor box into the reverse light wire. Any help would be greatly appreciated. I'm having a ' mare. :banghead Thanks!!

Paddy
F1 Driver
Posts: 1957
Joined: Sat Aug 23, 2008 5:22 pm
Currently Drives:: Megane Saloon 2.0 VVT Dynamique
Location: Belfast, Northern Ireland
Contact:

Re: Reverse light Wiring Colour

Postby Paddy » Fri Jul 31, 2009 3:26 pm

Cant you just take out the rear cluster and have a look?

or take it from the feed from the rear cluster?

chavva
Posts: 10
Joined: Wed Jul 08, 2009 1:35 pm

Re: Reverse light Wiring Colour

Postby chavva » Fri Jul 31, 2009 3:45 pm

Ulrich,
Thanks for the reply, however the sensors need to be wired to the reverse light so that they only activate when you put the car in reverse(i.e they only get power when the reverse light illuminates). i hope this makes sense and would appreciate if anyone can give me the heads up.
Thanks again :conf

-KJ-
Just Passed
Posts: 139
Joined: Sat Jul 26, 2008 1:11 pm
Currently Drives:: Mégane II Ph.1 1.6 16v Dynamique Luxe, full leather seats, Carminat Informé 1 with CD-changer.

Re: Reverse light Wiring Colour

Postby -KJ- » Fri Jul 31, 2009 5:07 pm

According to several forums:

In the black connector: Right side (driver side): pin 2, left side: pin 3.
From Holland! Megane II Phase 1, Black Pearl, 1.6 16V LPG, Dynamique Luxe, full leather, Carminat 1 with CD-changer, Phase 2 front.

chavva
Posts: 10
Joined: Wed Jul 08, 2009 1:35 pm

Re: Reverse light Wiring Colour

Postby chavva » Fri Jul 31, 2009 5:49 pm

KJ,

You are a star! Thanks very much :rock

Paddy
F1 Driver
Posts: 1957
Joined: Sat Aug 23, 2008 5:22 pm
Currently Drives:: Megane Saloon 2.0 VVT Dynamique
Location: Belfast, Northern Ireland
Contact:

Re: Reverse light Wiring Colour

Postby Paddy » Sat Aug 01, 2009 4:22 pm

You can still take from the cluster... Just trace from the reverse bulb to the correct wires....

-KJ-
Just Passed
Posts: 139
Joined: Sat Jul 26, 2008 1:11 pm
Currently Drives:: Mégane II Ph.1 1.6 16v Dynamique Luxe, full leather seats, Carminat Informé 1 with CD-changer.

Re: Reverse light Wiring Colour

Postby -KJ- » Sat Aug 01, 2009 4:31 pm

The black connector connects to the cluster! You can't open the cluster, so the connector is the easiest way to connect your wire to.
From Holland! Megane II Phase 1, Black Pearl, 1.6 16V LPG, Dynamique Luxe, full leather, Carminat 1 with CD-changer, Phase 2 front.

chavva
Posts: 10
Joined: Wed Jul 08, 2009 1:35 pm

Re: Reverse light Wiring Colour

Postby chavva » Sun Aug 02, 2009 2:51 pm

Thanks for all your help KJ and
Ulrich. I just used scotch lock clips to terminal 2(reverse light) and terminal 5(ground) on the driver side(offside). Thanks again!!! :grin


Return to “Megane Sedan”

Who is online

Users browsing this forum: No registered users and 14 guests