Page 1 of 1
boot piston thingies
Posted: Thu Feb 07, 2008 10:05 am
by kylehimself
right guys, this isn't actually a megane issue (would you believe) but i thot id ask here for a bit of advice.
my dads toyota avensis boot just dropped last night and creamed right of his noggin. nasty cut, ouch!
we just wanna know what you would call the things that hold the boot door up?? i can only describe them as lookin' like pistons or wee hydraulic cylinders. need to know what they are called so we can check for parts online so he can fit them himself as hursts toyota just like hurst renault can be pricey
cheers
kyle
Posted: Thu Feb 07, 2008 1:15 pm
by Say..."Renno"
Theyre gonna have loads of these in your local scrappies Kyle......
Posted: Thu Feb 07, 2008 1:38 pm
by kylehimself
then we shall get on down! dunno why i didn't think of that in the first place...
kyle
Posted: Thu Feb 07, 2008 4:30 pm
by Jonault
I think they're called gas struts.
Posted: Sat Feb 09, 2008 11:07 am
by cyclonebri1
Jonault wrote:I think they're called gas struts.
Bang on just make sure you fit them the "right" way up,
Re: boot piston thingies
Posted: Mon Jun 09, 2008 10:18 pm
by Ozzy82
i need one of these for my meg. opened the boot abit too much eager and then started hearing some hissing... noticed it was coming from one of the gas struts. anyone know how much they cost and where i can get one from??
Re: boot piston thingies
Posted: Tue Jun 10, 2008 12:22 pm
by sav0
look on ebay they are no more than £10
Re: boot piston thingies
Posted: Fri Jun 13, 2008 7:30 am
by R55VYS
mine went last night, resulted with me getting a nasty bump on the head out side morrisons, tw*t
Re: boot piston thingies
Posted: Fri Jun 13, 2008 1:10 pm
by A13XDT
Not hijacking the thread, but if your going to replace them you could "bling" them up a bit.
While working a well known DIY store i spotted clip on chrome pipe covers, thought I could make use of them somewhere. The result, chrome boot lifters.
Sorry for the poor photo quality (was taken on a replacement phone, not even my own phone)
Re: boot piston thingies
Posted: Fri Jan 01, 2010 5:24 pm
by 123rd
hi..anyone know how easy - or hard the gas struts are to replace?Thanks
Re: boot piston thingies
Posted: Sat Jan 02, 2010 2:24 pm
by Bumpy macaroon
real easy, look at each end of the strut there is a small metal rounded clip, ease it up with a screwdriver the strut will then pull off (its basically a ball knuckle joint), just make sure that the boot lid is supported before you start on the first, one strut is not man enough to hold the boot up
edit PS i used a nice length of wood cut to size to hold the boot up whilst doing the job on an old cavalier, help from a mate also welcome just in case it goes pear shaped
Re: boot piston thingies
Posted: Sat Jan 02, 2010 10:24 pm
by Paddy
As a matter of interest, when you press the electric button to open the boot does it open with out you having to 'pull it up'? (gas struts have enough force to push the door up)
The reason i ask is when i press the button to open the boot i have to 'pull it up' The gas struts have no 'power' at all, they do hold it open but thats it.
P