Page 1 of 1

Change Oil warning message still showing

Posted: Wed Jun 20, 2007 1:39 pm
by sam101
Hi,

RE: Megane 1.6 vvt

The change oil warning message came on last week and Ive just taken it into Kwik fit to change the oil/filter.

However the warning message has not reset and Kwikfit are telling me they cant help with the electronics. Is it possible to reset this myself or is it a job for another garage...

Thanks

Posted: Wed Jun 20, 2007 2:54 pm
by IainMW
Scroll through on the trip computer until it displays change oil soon and then press and hold the mileage reset button (on the speedo) in until the display resets to 18000 miles or whatever service interval your car has? this can take a few seconds.

Posted: Wed Jun 20, 2007 11:03 pm
by robznet
Hi Iain

Does this reset work with all models?

Worth knowing when your car is out of warranty (as kwik fit said - they cannot help with the electronics)

Would be a good pointer for all members! :D

Regards

Rob

Posted: Thu Jun 21, 2007 7:35 am
by IainMW
Yep it does work for all models

Forgot to mention, you need to hold the mileage reset button in until the display has stopped flashing.

Posted: Thu Jun 21, 2007 10:54 pm
by Hologram
My 06 1.6 does not have the button on the speedo to reset the mileage. My old car an 03 model did. My Change Oil Soon is lit and has come on far too early. :x

Posted: Fri Jun 22, 2007 11:01 am
by IainMW
How do you reset your odometer then?

You have to remember that the service intervals are based on mileage and time period.

e.g. 12000 miles or 1 year, which ever is sooner?
The time period is set from when the car is built, not the date of first registration.

Posted: Fri Jun 22, 2007 11:29 am
by rach74
MY 53 Plate meg saloon had the little button but now i have an 07 meg priv cc and to change the odometer or anything else on the computer you keep your finger pressed in on the button on the right stick, (the button you use to flick throught the computer) just keep it pressed in for 5 secs and this clears it

hope this helps

Posted: Fri Jun 22, 2007 11:17 pm
by Hologram
I can reset the usual data by holding in the button as you say. I have not been able to get rid of the Change Oil Soon message.

As I mentioned before, my car was a factory order and I had to wait until 29th July last year for delivery. I was somewhat surprised that the message appeared in May. Mileage then was around 7000

Seems odd to me.

Posted: Sat Jun 23, 2007 9:22 am
by WebCode
On the facelift models (06) you have to scroll throught the computer trip as with the old model but then press and hold the button on the end of the right hand stalk to reset the change oil soon message..