Page 1 of 1

Earthing Point

Posted: Sat Jan 11, 2020 7:59 pm
by Danny01boy
Hi all,
I have recently hardwired a nextbase dash cam into the internal fuse box in the passenger footwell. To get it to work I need to earth it on some metal but cant see anywhere close apart from the door but this will trap the wire when the door is shut. Does anyone have any ideas when I can do this. Cant find any metal or anyway to feed it to the bonnet.

Re: Earthing Point

Posted: Sat Jan 11, 2020 8:21 pm
by scooper1000
there is a good earth point just above the fuse box between fuse box and door seal..

Re: Earthing Point

Posted: Tue Jan 21, 2020 12:15 am
by PhilipC
You can use an existing nut/bolt as there're a fair few tucked up away on the bulkhead.

Re: Earthing Point

Posted: Sat Jul 18, 2020 2:24 pm
by TightFist9
Hi, not sure if you're still about. Can I ask if you have a dab radio? I did the same as you, but the camera interfered constantly with the radio reception. Eventually had to take camera out. Did you have same prob? Thanks