Front ABS Sensor Bracket Corroded

Problem with your Megane? Can't find an answer? Workshop manuals and technical notes are in here.

Moderators: q292u, Ray, AndyAdmin, Stranger

Malroy
Passed Theory
Posts: 34
Joined: Sat Sep 19, 2015 6:31 am
Currently Drives:: Megane II CC

Front ABS Sensor Bracket Corroded

Postby Malroy » Wed Aug 21, 2019 6:57 am

Hi all,
Replacing front bottom arms / wishbones on my Meg Mk2 and found the ABS sensor brackets which sandwich above the bottom ball joint to be rotten beyond repair. I've scoured this site and the net and not found anywhere selling replacements. This issue must be very very common indeed so I'm hoping someone who has "been there and done that" can offer a solution before I'm forced to go the hard route and make a pair. I've discounted breakers as I've just recovered two rad subframe support plates (mine were very rusty) and had to inspect many cars before I found a pair worth removing to refurb and re-use.

Thanks

Malroy
Passed Theory
Posts: 34
Joined: Sat Sep 19, 2015 6:31 am
Currently Drives:: Megane II CC

Re: Front ABS Sensor Bracket Corroded

Postby Malroy » Mon Aug 26, 2019 7:58 pm

Hi all,
Went ahead and made new Abs sensor wire brackets. Wasn't the hard route at all as quite easily made. Material cost me 2 quit, couple of holes, couple of bends, bit a paint and good as new. Sorted


Return to “Problems / Questions”

Who is online

Users browsing this forum: Google [Bot] and 52 guests