Sorry if this has been covered - have searched but found nothing specific.
Heater blower started only working on setting 4 a few weeks ago, then after a while stopped all together but randomly came on now and then Read up on the problem and changed the loom to the resistor and the resistor + wiring to the fan. After this the fan came on but was stuck on constant full speed (even when switch on 0. - all speeds the same) turned ignition off and started again and then the fan didn’t come on at all!
Is there something I’ve missed, or is it the fan that is faulty?
Any help is appreciated before I give in and take to the garage.
Thanks I’m advance, sorry for long post as
My first
