Common rail sensor defect and "Non standard"
Posted: Thu Nov 08, 2018 5:56 pm
Hi !
I hope to get some help...
I have an "injection problem" with Megane 2 1.5 DCI 105cv, model Estate from 2007.
The garage told me it was the common rail pressure sensor which was faulty. They couldn't buy the sensor, so they told me I could do it and replace it myself. (else they could buy the full common rail and make me pay 600€)
So I went to look for that sensor, and I bought that one which seemed to be appropriate :
https://www.ebay.fr/itm/Renault-Clio-ka ... 4902.l9144
But when I dismantled the car to replace sensor... SURPRISE, not the same sensor !
I ordered a 55PP03-01, and the one instaled was a 55PP02-02
Different shape, different connectic poka yoke.
Well it obviously won't work.
But when I google the 55PP02-02 it is not supposed to be compatible with my car... but with Ford, Peugeot, Citroen and Volvo...
https://www.ebay.fr/itm/251698106955
What should I do ? I mean, I can order the 55P02-02 anyway, and I can put it in place. But what if it is not callibrated the same as my current sensor ? Don't I risk dammaging the engine.
Or is there only 1 callibration possible for each sensor?
Thanks for helping !
My car is half dismantled now, and if I can avoid the struggle of putting it back into order and dismantle again in a few days that would be welcome...
I hope to get some help...
I have an "injection problem" with Megane 2 1.5 DCI 105cv, model Estate from 2007.
The garage told me it was the common rail pressure sensor which was faulty. They couldn't buy the sensor, so they told me I could do it and replace it myself. (else they could buy the full common rail and make me pay 600€)
So I went to look for that sensor, and I bought that one which seemed to be appropriate :
https://www.ebay.fr/itm/Renault-Clio-ka ... 4902.l9144
But when I dismantled the car to replace sensor... SURPRISE, not the same sensor !
I ordered a 55PP03-01, and the one instaled was a 55PP02-02
Different shape, different connectic poka yoke.
Well it obviously won't work.
But when I google the 55PP02-02 it is not supposed to be compatible with my car... but with Ford, Peugeot, Citroen and Volvo...
https://www.ebay.fr/itm/251698106955
What should I do ? I mean, I can order the 55P02-02 anyway, and I can put it in place. But what if it is not callibrated the same as my current sensor ? Don't I risk dammaging the engine.
Or is there only 1 callibration possible for each sensor?
Thanks for helping !
My car is half dismantled now, and if I can avoid the struggle of putting it back into order and dismantle again in a few days that would be welcome...