Have noticed whilst using the brakes in these darker days /nights with the lights on , when indicating left ,the indicator and audible click go into an erratic speed ,almost morse code if I could say that.
Please could you advise,I think it sounds like ..--..(dot dot dash dash dot dot)which means ?(Question Mark)
cheers
Pete
Lights on, braking and indicating left
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Pass Plus
- Posts: 165
- Joined: Tue Apr 13, 2010 9:00 pm
- Currently Drives:: megane 19 dci
Re: Lights on, braking and indicating left
sounds like either a short or a faulty relay, what happens if you use the hazard switch?
-
- F1 Driver
- Posts: 1766
- Joined: Thu Jun 03, 2010 3:15 pm
- Currently Drives:: Megane II 1.5dCI 100HP
Re: Lights on, braking and indicating left
take out the rear cluster and check inside for rust on the cables that goes for the chassis, unfortunately is common to happen
good luck
good luck
-
- Posts: 13
- Joined: Wed Oct 13, 2010 5:36 am
- Currently Drives:: megane 2 1.5 dci tech run 2008
Re: Lights on, braking and indicating left
I've been having exactly the same problem on my megane. I tried changing bulbs, reseating bulbs but the problem always came back after about a day. Last thing I tried was spaying some silicone (https://www.halfords.com/webapp/wcs/stor ... 55223#dtab) on the electrical connections in the light cluster and everything has been fine for about a month now.
Cheers
Rob
Cheers
Rob
-
- Posts: 6
- Joined: Wed Sep 15, 2010 10:50 pm
Re: Lights on, braking and indicating left
ive also had this problem.
i checked the earth connections , checked the terminals for rust and all were ok.
it turned out to be the plug on the loom that goes into the rear light cluster , the connections were loose , so all i did was push them together sightly with a small screwdriver to make the connection better and all is ok.
how long this lasts is anyones guess but its worth a go.
i checked the earth connections , checked the terminals for rust and all were ok.
it turned out to be the plug on the loom that goes into the rear light cluster , the connections were loose , so all i did was push them together sightly with a small screwdriver to make the connection better and all is ok.
how long this lasts is anyones guess but its worth a go.
Return to “Problems / Questions”
Who is online
Users browsing this forum: Bing [Bot] and 56 guests