1,9 DCI Clutch

Problem with your Megane? Can't find an answer? Workshop manuals and technical notes are in here.

Moderators: q292u, Ray, AndyAdmin, Stranger

Post Reply
ajojets
Posts: 8
Joined: Fri Jan 08, 2010 11:53 am

1,9 DCI Clutch

Postby ajojets » Fri Jul 29, 2011 8:30 pm

The clutch on my 1.9 DCI is slipping, how much of a job is it to change the plate and cover, do I need any special tools other than an alignment tool. :-(
Andy.
Top
tomalamix
F1 Driver
Posts: 1766
Joined: Thu Jun 03, 2010 3:15 pm
Currently Drives:: Megane II 1.5dCI 100HP

Re: 1,9 DCI Clutch

Postby tomalamix » Tue Aug 02, 2011 2:28 pm

the alignment tools and a slippery clutch doesnt have any connection at the first sight. why do you say you could need the alignment tool?
Top
ajojets
Posts: 8
Joined: Fri Jan 08, 2010 11:53 am

Re: 1,9 DCI Clutch

Postby ajojets » Wed Aug 03, 2011 8:08 am

Hi, Because when you take the clutch cover plate off to get at the clutch friction plate , when you put a new cover plate and friction plate in they have to be aligned to the flywheel centre , an alignment tool is used for this, I was asking if any other tools are needed and how much of a job it would be to do at home.
thanks.
Top
davelowe
Driving Legend
Posts: 3136
Joined: Thu May 10, 2007 3:40 pm

Re: 1,9 DCI Clutch

Postby davelowe » Sun Aug 07, 2011 9:26 pm

A big job - axles and transmission out of the car. Not easy without a transmission jack. Plus you have to raise the car very high.
Silver 08 plate 5dr 1.5dci Dynamique 106 Tech Run (re-mapped)

Red 03 plate 5dr 1.9 Dynamique dci120

Best advice for Megane owners: sell it before it bankrupts you!
Top
Post Reply

Return to “Problems / Questions”

Who is online

Users browsing this forum: Google [Bot] and 45 guests