53 plate 1.9dci non starter

Problem with your Megane? Can't find an answer? Workshop manuals and technical notes are in here.

Moderators: q292u, Ray, AndyAdmin, Stranger

martand
Posts: 2
Joined: Sat Dec 11, 2010 3:55 pm
Currently Drives:: our lasses car

53 plate 1.9dci non starter

Postby martand » Sat May 21, 2011 5:40 pm

hello guy im affraid i need a little help, i have just replaced the engine in megane ii . i have tried to start it but i get nothing the dash lights come on, but there is no power to the starter solenoid. i have managed to lose a clip off the clutch pipe so i cant bleed it , would this cause the problem. i have traced the wire to the solenoid and it is supplied from the engine multiplex unit , the fuse there is ok. any help very much appreciated.

chewbacker
Pass Plus
Posts: 165
Joined: Tue Apr 13, 2010 9:00 pm
Currently Drives:: megane 19 dci

Re: 53 plate 1.9dci non starter

Postby chewbacker » Sat Aug 20, 2011 2:24 pm

did you fit the ecu from the replacement engine or is it still from your oringal one


Return to “Problems / Questions”

Who is online

Users browsing this forum: No registered users and 81 guests