Car lowered
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Pass Plus
- Posts: 220
- Joined: Mon Nov 22, 2010 5:50 am
- Currently Drives:: Renualt megane 1.5cdi (80 dyo) blue
- Location: south shields
Car lowered
Iv lowered my car but it is bril from the front but the back end still looks massively high
Has anyone else got this problem ??
viewtopic.php?f=7&t=15582
Remapped, pipecrosser cone induction kit, tinted windows, dropped 70mm, 8k hids with privet plate
K4 VNW over and out!
Remapped, pipecrosser cone induction kit, tinted windows, dropped 70mm, 8k hids with privet plate
K4 VNW over and out!
-
- F1 Driver
- Posts: 1689
- Joined: Wed Nov 25, 2009 3:22 pm
- Currently Drives:: 57 megane with roof, engine, wheels, doors... All the usual things.
- Location: Sheffield
Re: Car lowered
What springs have you used?
Re: Car lowered
I lowered mine at the beggining of last week using spax -45mm, Here 2 photo's, 1 of the back before and one of it now. We'll have a look and see if its any different to yours. I must apoligise for the size and quality of the photo's. They were snapped quickly on a phone.
Before:
After:
Hope this helps in some way..
Before:
After:
Hope this helps in some way..
2009 Megane MK2 1.6 16v VVT, Rear Tinted Windows, 18 Kei Force 10 Hyper Black, Painted Calipers, Lowered 45mm, Full 12000k HID's, R26.R Spoiler
-
- Pass Plus
- Posts: 220
- Joined: Mon Nov 22, 2010 5:50 am
- Currently Drives:: Renualt megane 1.5cdi (80 dyo) blue
- Location: south shields
Re: Car lowered
still looks high
iv had to remove the front mud flaps because it scuffed all the time but
i want it lower on the rear
iv had to remove the front mud flaps because it scuffed all the time but
i want it lower on the rear
viewtopic.php?f=7&t=15582
Remapped, pipecrosser cone induction kit, tinted windows, dropped 70mm, 8k hids with privet plate
K4 VNW over and out!
Remapped, pipecrosser cone induction kit, tinted windows, dropped 70mm, 8k hids with privet plate
K4 VNW over and out!
-
- F1 Driver
- Posts: 1689
- Joined: Wed Nov 25, 2009 3:22 pm
- Currently Drives:: 57 megane with roof, engine, wheels, doors... All the usual things.
- Location: Sheffield
Re: Car lowered
Buy something heavy to out in the boot! lead flashing or something... Hehe
-
- Pass Plus
- Posts: 220
- Joined: Mon Nov 22, 2010 5:50 am
- Currently Drives:: Renualt megane 1.5cdi (80 dyo) blue
- Location: south shields
Re: Car lowered
joeishmather wrote:Buy something heavy to out in the boot! lead flashing or something... Hehe
Or chop springs lol
But mot failure !!
viewtopic.php?f=7&t=15582
Remapped, pipecrosser cone induction kit, tinted windows, dropped 70mm, 8k hids with privet plate
K4 VNW over and out!
Remapped, pipecrosser cone induction kit, tinted windows, dropped 70mm, 8k hids with privet plate
K4 VNW over and out!
Re: Car lowered
was it 45 mil springs you got?
Cos if its 30's just get 45's and put them in the back
I dont think its any diffrent coz when you look at mine from the back its high aswel...
Its maybe just the setup on these cars
Cos if its 30's just get 45's and put them in the back
I dont think its any diffrent coz when you look at mine from the back its high aswel...
Its maybe just the setup on these cars
2009 Megane MK2 1.6 16v VVT, Rear Tinted Windows, 18 Kei Force 10 Hyper Black, Painted Calipers, Lowered 45mm, Full 12000k HID's, R26.R Spoiler
-
- Pass Plus
- Posts: 220
- Joined: Mon Nov 22, 2010 5:50 am
- Currently Drives:: Renualt megane 1.5cdi (80 dyo) blue
- Location: south shields
Re: Car lowered
No coilovers fk onesdrop 70mm no treads left to wind down more
viewtopic.php?f=7&t=15582
Remapped, pipecrosser cone induction kit, tinted windows, dropped 70mm, 8k hids with privet plate
K4 VNW over and out!
Remapped, pipecrosser cone induction kit, tinted windows, dropped 70mm, 8k hids with privet plate
K4 VNW over and out!
Return to “Problems / Questions”
Who is online
Users browsing this forum: No registered users and 51 guests