Central Locking Cycle - Help please

Problem with your Megane? Can't find an answer? Workshop manuals and technical notes are in here.

Moderators: q292u, Ray, AndyAdmin, Stranger

samuel1
Posts: 2
Joined: Tue Oct 19, 2010 6:10 am

Central Locking Cycle - Help please

Postby samuel1 » Tue Apr 05, 2011 4:48 pm

I have a 2002 megane, which at some stage has had a new door and wing. Unfortunately the locking/unlocking cycle is different between the new door and the other 3 (plus boot) Anyone help with how I get them sync'd so they all lock and unlock together.?

Tahnks

User avatar
Ray
Site Admin
Posts: 3844
Joined: Mon Mar 21, 2005 1:11 am
Currently Drives:: 2005 Megane Privilege - Now Sold
Location: Hong Kong
Contact:

Re: Central Locking Cycle - Help please

Postby Ray » Tue Apr 05, 2011 5:18 pm

i'm not quite sure i follow your problem.
Image

samuel1
Posts: 2
Joined: Tue Oct 19, 2010 6:10 am

Re: Central Locking Cycle - Help please

Postby samuel1 » Wed Apr 06, 2011 9:27 am

when I use the remote fob to lock and unlock the car. I have either :-

1 door locked (the replacement door) & 3 doors unlocked
or
1 door unlocked and 3 locked. The car is never actually fully secure.
This has been caused by a replacement door, not locking and unlocking at the same time as the old system.

I need a way to sync (all) doors to lock and unlock at the same time

wyuen1
Passed Theory
Posts: 25
Joined: Tue Jan 27, 2009 2:01 pm
Currently Drives:: Renault Megane

Re: Central Locking Cycle - Help please

Postby wyuen1 » Wed Apr 06, 2011 2:08 pm

i recently changed the drivers door and rear door, did the mechanic strip your existing wiring loom on your original door and swapped it on to the new door? when they were changing the doors for me, the wiring loom that was on the new door didn't work with my electric window or locking so he had to swap them around. hope this helps

User avatar
Ray
Site Admin
Posts: 3844
Joined: Mon Mar 21, 2005 1:11 am
Currently Drives:: 2005 Megane Privilege - Now Sold
Location: Hong Kong
Contact:

Re: Central Locking Cycle - Help please

Postby Ray » Wed Apr 06, 2011 5:21 pm

which is the replacement door?
Image

triumph2.5man
Advanced Driver
Posts: 296
Joined: Fri Jan 29, 2010 8:52 pm
Currently Drives:: Mondeo TDCI mk3 2002
Pug 307HDI90 1.6 (family car)
Megane II dynamique 1.5dci 722 engine 2003
Ford Galaxy 115bhp 2002 (family car)
Megane 3 1.5dci 2009 832 engine (family car)

Re: Central Locking Cycle - Help please

Postby triumph2.5man » Sat Apr 09, 2011 10:40 pm

Hello Sam, are you still with us or have you solved the problem?
I fully understand your predicament. It's a pity the person who fitted the new door did not check all was in order before releasing the car. Basically it should not be your problem. Can't you take it back under complaint?

If not you could try this;-
Lock the three "old" doors, thus leaving the new one unlocked.
Remove the wiring plug from the new door. The wires run in a loom from the door to the body. Release the catch and remove the plug from the socket where it meets the body. Have a look and all will become clear.
At this point unlock the 3 doors. All locks will now be at the same potential; ie each central locking motor will be in the same position, ready to lock. Now reconnect the door plug and press the lock button (no 2). With any luck, they will all work as normal. If this does not work, post another reply and I will advise you further.
Best of luck
Mike


Return to “Problems / Questions”

Who is online

Users browsing this forum: Bing [Bot] and 9 guests