Hi everyone,
After pulling the bonnet cable in the foot well of the car the bonnetm will not spring to it's first stop point to allow me to get my fingers under it when pulling the release cable in the grill.
Any ideas how to get this to the first position.
The cable did make the release sound but I think the spring is solid.
Bonnet won't open after pulling cable
Moderators: q292u, Ray, AndyAdmin, Stranger
-
sporttourer
- Pass Plus
- Posts: 177
- Joined: Sat Aug 06, 2005 10:55 am
Bonnet won't open after pulling cable
---------------------
All information and/or advice given is in good faith and any action taken by the reader is done so at their own risk.
All information and/or advice given is in good faith and any action taken by the reader is done so at their own risk.
-
Ray
- Site Admin
- Posts: 3845
- Joined: Mon Mar 21, 2005 1:11 am
- Currently Drives:: 2005 Megane Privilege - Now Sold
- Location: Hong Kong
Re: Bonnet won't open after pulling cable
try prying the bonnet up a bit more with fingers or something. mine does that a lot these days
-
sporttourer
- Pass Plus
- Posts: 177
- Joined: Sat Aug 06, 2005 10:55 am
Re: Bonnet won't open after pulling cable
Worked a treat.
the spring was stuck in the compressed position.
A screwdriver to pull it out and lots of grease.
Five or six releases later, it does as it should.
the spring was stuck in the compressed position.
A screwdriver to pull it out and lots of grease.
Five or six releases later, it does as it should.
---------------------
All information and/or advice given is in good faith and any action taken by the reader is done so at their own risk.
All information and/or advice given is in good faith and any action taken by the reader is done so at their own risk.
Return to “Problems / Questions”
Who is online
Users browsing this forum: No registered users and 45 guests