Clutch causing electronic failure

[bangbang]

Hi

My clutch has not been starting the car for a while, told the common fault was the wire has broke.

Took car into Renault for a few things(coils, sensor) and asked them to sort out the clutch too, but they failed. They reset my ECU/CPU/EMS as faults kept showing up when there was no issue, this solved that.

The guy said the clutch is an easy fix, then i read here it was easy too! BUT i soldered the wires back, and taped over them, and all was fine.

10 miles down the road i get an electronic faulure warning and service light.

I pulled wires apart and then the warnings goes.

Its not the biggest problem in the world, but I prefer to start of the clutch than the break.

any ideas whats causing the fault?

[bangbang]

Hi

any ideas on why putting the clutch wires back togeather is causing an electronic fault display on the trip computer screen? Renault are asking £95 to put the wires back togeather, and said no error should come up! so lost what to do, unless i hand more cash to them.

thanks

[Ray]

you've reversed the wires accidently?