ok my megane wont start.
i bump strted it and it was fine?
i changed the battery and starter motor still no difference does any1 have any ideas y my car wont start?
thanks
megane 03 wont start unless bump starteed
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Passed Theory
- Posts: 36
- Joined: Mon Feb 09, 2009 5:40 pm
- Currently Drives:: "99 1.2 Clio
Soon to be a 3dr megane
Re: megane 03 wont start unless bump starteed
Check fuses/relays?
Is the engine turning over when you press the start button?
Is the engine turning over when you press the start button?
Re: megane 03 wont start unless bump starteed
its not doing nufin mate no noise or nufin?
-
- Advanced Driver
- Posts: 334
- Joined: Sun Mar 01, 2009 3:54 pm
- Currently Drives:: Renault megane CC 1.6
Re: megane 03 wont start unless bump starteed
Id say check starter motor, or starter relay.
Alan
Alan
Megane CC 1.6vvt and 1.4 clio
Re: megane 03 wont start unless bump starteed
thanks everybody for there help...
i changed the starter motor the battery and still no difference i wasent impressed.
sumfin told me 2 check the fuse.!
guess what!
the fuse had gone!
lol
i changed the starter motor the battery and still no difference i wasent impressed.
sumfin told me 2 check the fuse.!
guess what!
the fuse had gone!
lol
Re: megane 03 wont start unless bump starteed
Lucky you didn't funk the timing belt!
Silver 08 plate 5dr 1.5dci Dynamique 106 Tech Run (re-mapped)
Red 03 plate 5dr 1.9 Dynamique dci120
Best advice for Megane owners: sell it before it bankrupts you!
Red 03 plate 5dr 1.9 Dynamique dci120
Best advice for Megane owners: sell it before it bankrupts you!
- Sadret89
- Advanced Driver
- Posts: 412
- Joined: Fri Sep 18, 2009 12:52 am
- Currently Drives:: RENAULT MEGANE 1.5dci 80, INDUCTION KIT, 8K XENON HEADLIGHTS, 225 SPORT FULL BODY-KIT & EXHAUST SYSTEM, SOUND SYSTEM, TDI TUNING BOX, EDC BLACK STUFF FRONT BRAKE PADS
Re: megane 03 wont start unless bump starteed
also try in future the switch (Grey and green) which is on top of the clutch and brake pedal. My car somehow had them two wires cut so the cars ignition would turn on but the engine wouldn't fire on.
Check out the progress viewtopic.php?f=13&t=13676
-
- F1 Driver
- Posts: 1957
- Joined: Sat Aug 23, 2008 5:22 pm
- Currently Drives:: Megane Saloon 2.0 VVT Dynamique
- Location: Belfast, Northern Ireland
- Contact:
Re: megane 03 wont start unless bump starteed
vee wrote:thanks everybody for there help...
i changed the starter motor the battery and still no difference i wasent impressed.
sumfin told me 2 check the fuse.!
guess what!
the fuse had gone!
lol
The words 'school boy error' come to mind!
-
- Posts: 15
- Joined: Sat Jun 20, 2009 1:23 pm
- Currently Drives:: 2005 Megane 1.5 Dci 5 Door Authentique in Platinum. Mods: TQ-131 Speakers, Aux In cable.
2005 Megane Gran Scenic 1.9 Dci in black. Mods: Aux In cable.
Re: megane 03 wont start unless bump starteed
My '05 Megane had the same symptoms after the first month or so, which turned out to be an earthing problem. It could jump start but the ignition wouldn't allow you to just start it as normal. Dunno if that's a common fault?
The Master of Mild Mods! 
2005 1.5 Dci 5 Door: TQ-131 Speakers, Aux In cable, upgraded interior door handles and central dash, mock carbon fibre gear knob off ebay, leather gear gaiter and silver sprayed surround.

2005 1.5 Dci 5 Door: TQ-131 Speakers, Aux In cable, upgraded interior door handles and central dash, mock carbon fibre gear knob off ebay, leather gear gaiter and silver sprayed surround.
- Sadret89
- Advanced Driver
- Posts: 412
- Joined: Fri Sep 18, 2009 12:52 am
- Currently Drives:: RENAULT MEGANE 1.5dci 80, INDUCTION KIT, 8K XENON HEADLIGHTS, 225 SPORT FULL BODY-KIT & EXHAUST SYSTEM, SOUND SYSTEM, TDI TUNING BOX, EDC BLACK STUFF FRONT BRAKE PADS
Re: megane 03 wont start unless bump starteed
Its something between the switch above the clutch and brake pedal and the igintion button, i've cut the switch out and connected the wires together but once I hit 70mph service light comes on and I have to re-earth the wires. AA told me they just need to be soldered togehter. So check your wires don't have any cuts in them and get the switch checked out too.
Return to “Problems / Questions”
Who is online
Users browsing this forum: Google [Bot] and 76 guests