check injection UPC problem.....

Problem with your Megane? Can't find an answer? Workshop manuals and technical notes are in here.

Moderators: q292u, Ray, AndyAdmin, Stranger

daleslade
Posts: 7
Joined: Fri Oct 17, 2008 2:26 pm
Currently Drives:: 2005 Megane 1.9DCI

check injection UPC problem.....

Postby daleslade » Sun Oct 26, 2008 7:36 am

Hi, I recently purchased a 2005 renault megane 1.9DCI. after a couple of weeks, i got an error message check injection with the service light on everytime i started the car. i took it ot renault and they diagnosed the problem as being a short with the UPC and i would have to replace the computer. if i start the car, stop it and start it agin, the error message and the service light go off. i asked if it could be the EGR valve or the glow plugs and was told they are fine according to the diagnostics and it was definitely a short with the UPC which needs to be replaced. i was wondering if anyone else has had a smiliar problem and how they rectified it, and also if it is a serious problem if i carry on driving as it is an expensive excersise to replace the UPC. Cheers

User avatar
nickbell69
Advanced Driver
Posts: 601
Joined: Sat Apr 28, 2007 9:13 pm
Currently Drives:: megane 1.9dci priv 53
Location: wrexham

Re: check injection UPC problem.....

Postby nickbell69 » Sun Oct 26, 2008 12:58 pm

Lot of people get this message and most of time it is glow plugs.
Would be worth spending £30 on new set before paying dealer a fortune to work on car!!

daleslade
Posts: 7
Joined: Fri Oct 17, 2008 2:26 pm
Currently Drives:: 2005 Megane 1.9DCI

Re: check injection UPC problem.....

Postby daleslade » Sun Oct 26, 2008 4:05 pm

I also have a suspicion it is the glow plugs but will that not show up on the diagnosis of engine and injection system, the fault error code was defintately a short from the UPC? will check glow plugs next weekend and see how they look. Really weird that if i start the car, stop it and then start again it goes away, damn technology!

monkeymanonk
Learner Driver
Posts: 54
Joined: Sun Dec 16, 2007 9:13 pm
Location: manchester

Re: check injection UPC problem.....

Postby monkeymanonk » Sun Oct 26, 2008 5:38 pm

Did you sort the problem as i have the same fault?
Any help please!!!

AlexB
Driving Legend
Posts: 4314
Joined: Tue Mar 22, 2005 8:17 pm
Currently Drives:: Renaultsport R.S.250 Cup

Re: check injection UPC problem.....

Postby AlexB » Sun Oct 26, 2008 7:18 pm

What codes did they read from the on-board computer?
AlexB
(no, a different AlexB)

Poddy
Pass Plus
Posts: 210
Joined: Mon Oct 27, 2008 2:20 am
Currently Drives:: Kia Cee'd 1.6 CRDi
Contact:

Re: check injection UPC problem.....

Postby Poddy » Mon Oct 27, 2008 3:05 am

I have a similar problem

when im driving around 30mph in 4th gear by car starts chugging, but when i let my foot off the accelerater it stops,
ive took the car to the dealerhip they keep telling me theres nothing wring with the car, anyone else had this?
07 Kia Cee'd 1.6 CRDi
Remapped

daleslade
Posts: 7
Joined: Fri Oct 17, 2008 2:26 pm
Currently Drives:: 2005 Megane 1.9DCI

Re: check injection UPC problem.....

Postby daleslade » Mon Oct 27, 2008 5:09 am

I Haven't had any performance issues with the car, i do however have an extended warranty on the car so i am going to claim on the UPC as the error code was definately a fault with the UPC (a short), so if covered I will replace and see if that alleviates the problem. will keep you guys posted.

daleslade
Posts: 7
Joined: Fri Oct 17, 2008 2:26 pm
Currently Drives:: 2005 Megane 1.9DCI

Re: check injection UPC problem.....

Postby daleslade » Sat Nov 01, 2008 12:48 pm

Hey, replaced the UPC and problem solved. No more check injection lights or service lights, good to see "no message available" again! Miles of smiles now hopefully.

Andy Ramsay
Posts: 2
Joined: Mon Nov 03, 2008 5:12 pm
Currently Drives:: Megan Scenic II 1.9 DCi 120

Re: check injection UPC problem.....

Postby Andy Ramsay » Mon Nov 03, 2008 5:35 pm

I had the same problem with my 1.9 dci 120 scenic II. Ireplaced the glow plugs and that cured the problem. The reason that the warning lights go out after the engine has been run for a short time is this:- The engine mamagement computer does not require the glow plugs to switch on and pre heat the cylinders as the engine is already warm and combustion will take place more easily, without the need for a preheat.

The injectors cost me £8 each from my local motor factor and they are relatively easy to fit. Care is needed when removing as they can be quite tight. Also care needs to be used when replacing to get them started on the right thread. Cross threading them can lead to a nightmare scenario as they may not seal properly and reach the required position. They need to be tightened to a required tightness so a torque wrench is handy.


Return to “Problems / Questions”

Who is online

Users browsing this forum: No registered users and 37 guests