handbrake!!!
Moderators: q292u, Ray, AndyAdmin, Stranger
handbrake!!!
Any idea how to ajust the hand handbrake????
-
markren2004
- Advanced Driver
- Posts: 531
- Joined: Thu May 10, 2007 4:49 pm
- Location: Leeds
Handbrake Adjustment
did mine the other day. It's a simple 5min job.
1. Ease out the front panel from the center console (the piece with the 2 slots in where the handbrake fits into.
It is clipped in, using a screwdriver (with a piece of card to not damage the plastic) and putting figures in the 2 slots and pulling it comes away.
2. you will then see the adjustment nut which you tighten with a 13mm spanner.
with the handbrake "off" just tighten up any slack, but don't over do it.
1. Ease out the front panel from the center console (the piece with the 2 slots in where the handbrake fits into.
It is clipped in, using a screwdriver (with a piece of card to not damage the plastic) and putting figures in the 2 slots and pulling it comes away.
2. you will then see the adjustment nut which you tighten with a 13mm spanner.
with the handbrake "off" just tighten up any slack, but don't over do it.
Return to “Problems / Questions”
Who is online
Users browsing this forum: Google [Bot] and 32 guests