
Rear Discs
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Posts: 21
- Joined: Sun Apr 10, 2005 4:12 pm
- Location: N.WALES
Rear Discs
Can anyone tell me if it is a difficult job to change the rear discs on my wife's 1.6 megane. I've just priced a set at £115+vat, is that good? 

-
- Posts: 21
- Joined: Sun Apr 10, 2005 4:12 pm
- Location: N.WALES
-
- Driving Legend
- Posts: 4314
- Joined: Tue Mar 22, 2005 8:17 pm
- Currently Drives:: Renaultsport R.S.250 Cup
ABS rings should be also installed.
For this job you will need a long hub nut socket, a long extension/breaker bar and a powerful torque wrench. This is in addition to the "regular" tools. The calliper bolts require threadlock (it was discussed earlier).
It is possible to transfer the old bearings and rings to the new discs, but this requires special tools. LGC wrote about it some time ago.
For this job you will need a long hub nut socket, a long extension/breaker bar and a powerful torque wrench. This is in addition to the "regular" tools. The calliper bolts require threadlock (it was discussed earlier).
It is possible to transfer the old bearings and rings to the new discs, but this requires special tools. LGC wrote about it some time ago.
AlexB
(no, a different AlexB)
(no, a different AlexB)
-
- Driving Legend
- Posts: 4314
- Joined: Tue Mar 22, 2005 8:17 pm
- Currently Drives:: Renaultsport R.S.250 Cup
I bought them from
https://www.speedways.co.uk/
on LGC's advice. Not as cheap as sideswipe quoted...
https://www.speedways.co.uk/
on LGC's advice. Not as cheap as sideswipe quoted...
AlexB
(no, a different AlexB)
(no, a different AlexB)
Return to “Problems / Questions”
Who is online
Users browsing this forum: No registered users and 30 guests