crankshaft pulley torque settings megane 1.5dci 2004

[mechanic]

Can somebody tell me what's the torque settings for the crankshaft pulley bolt on a megane 1.5dci 2004?

[quaker@eircom.net]

hello there.....according to the Haynes Manual (for years 2002 to 2005 ) that I have there are two situations..
If your crankshaft bolt is an M12 then stage one is to torque it to 60 NM and stage two is to angle tighten it a further 100° +/- 10°
If your crankshaft bolt is an M14 then stage one is to torque it to 120 NM and stage wo is to angle torque it a further 95° +/- 15°
rgds Maurice

[mechanic]

Thanks for answering my question