My passenger front window doesn't go up and down by the switch on the passenger door or from the drivers door
please can someone help
i have a mk2 if this helps
passenger front window
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Passed Theory
- Posts: 26
- Joined: Fri May 02, 2014 5:16 pm
- Currently Drives:: 2006 1.5 dci 106
-
- Pass Plus
- Posts: 195
- Joined: Tue Apr 22, 2014 11:02 pm
- Currently Drives:: Megane cc
Re: passenger front window
That will most likely be the module in the door
-
- Posts: 8
- Joined: Wed May 14, 2014 9:59 pm
- Currently Drives:: Renault Megane Hatchback 1.6 VVT Dynamique 5d
Re: passenger front window
or like on mine - when I removed the door card there was no motor & wiring loom
-
- Pass Plus
- Posts: 195
- Joined: Tue Apr 22, 2014 11:02 pm
- Currently Drives:: Megane cc
Re: passenger front window
Yes that is an issue no motor never too good 

-
- Learner Driver
- Posts: 74
- Joined: Mon Aug 09, 2010 7:38 am
- Currently Drives:: Megane II 1.5 DCI OASIS 2006 55 PLATE.
Re: passenger front window
Hi,
It will be the window regulator module.
Chap on Ebay repairs them, he does a damn good job aswell.
See below topic:-
viewtopic.php?f=2&t=21783
Had mine done by him. Sent it off and got it back with 48 hours.
Regards
Tony
It will be the window regulator module.
Chap on Ebay repairs them, he does a damn good job aswell.
See below topic:-
viewtopic.php?f=2&t=21783
Had mine done by him. Sent it off and got it back with 48 hours.
Regards
Tony
-
- Passed Theory
- Posts: 26
- Joined: Fri May 02, 2014 5:16 pm
- Currently Drives:: 2006 1.5 dci 106
Re: passenger front window
Thanks for the help
-
- Learner Driver
- Posts: 60
- Joined: Thu Jan 16, 2014 4:08 pm
- Currently Drives:: Renault megane mk2 1.5dci dynamique
with a non starter Renault Megane mk2 1.5 authentique for fixing
Re: passenger front window
I have found that water getting into the car door causes the module to fry and eventually to fail. I have replaced two on my car and the last one I fitted was not a original part but a funny replacement that was supposed to be waterproof but it too has failed. Ive given up for now but when I do replace it Im going to try to waterproof it and the wiring etc. Good luck with yours.
-
- Driving Legend
- Posts: 4314
- Joined: Tue Mar 22, 2005 8:17 pm
- Currently Drives:: Renaultsport R.S.250 Cup
Re: passenger front window
Yep, waterproof it. I filled the connectors with dielectric grease and wrapped the whole regulator in a freezer bag. The bag needs to be open at the bottom for water to escape. Make sure the blades inside the connector are clean and tight.
AlexB
(no, a different AlexB)
(no, a different AlexB)
-
- Learner Driver
- Posts: 74
- Joined: Mon Aug 09, 2010 7:38 am
- Currently Drives:: Megane II 1.5 DCI OASIS 2006 55 PLATE.
Re: passenger front window
Hi,
The guy off ebay waterproofs it so it does not happen again. He puts heatshrink over it in order to stop water ingress.
Tony
The guy off ebay waterproofs it so it does not happen again. He puts heatshrink over it in order to stop water ingress.
Tony
Return to “Problems / Questions”
Who is online
Users browsing this forum: No registered users and 26 guests