Page 1 of 3

Phase 2 225 replica

Posted: Wed Jun 11, 2008 8:08 pm
by STEVIE
Hi this is my new 225 phase 2 replica
This is it before as a 225 phase 1 replica
Image

New headlights on
Image

Phase 2 bumper on

Image

Bonnet down
Image

Plate on

Image

All done

Image

What do you all think

I would like to thank DEEJAY 225 RS for doing an ace job spraying it and with a quick turn around cheers mate
New fog lights to go on at the weekend
also headlight washers to go on at the weekend

steve

Re: Phase 2 225 replica

Posted: Thu Jun 12, 2008 8:11 am
by jooooohn
n1 now get ur old 1 on ebay lol

Re: Phase 2 225 replica

Posted: Thu Jun 12, 2008 8:15 am
by jooooohn
or save the hassle and my offer still stands :cool:

Re: Phase 2 225 replica

Posted: Thu Jun 12, 2008 11:54 am
by mark_b
looks bril m8.....top job :cool:

Re: Phase 2 225 replica

Posted: Thu Jun 12, 2008 1:27 pm
by wanda
I need to try that one day. When you took offthe bumper where did you put the wires of the old fog lights?

Re: Phase 2 225 replica

Posted: Thu Jun 12, 2008 5:12 pm
by STEVIE
jooooohn wrote:or save the hassle and my offer still stands :cool:


Dude you can have it for your offer without the grills and you collect

steve

Re: Phase 2 225 replica

Posted: Thu Jun 12, 2008 5:13 pm
by STEVIE
wanda wrote:I need to try that one day. When you took offthe bumper where did you put the wires of the old fog lights?

Hi mate what do you mean what did i do with the fog light wire
because i just left them dangling while i fitted the new bumper
steve

Re: Phase 2 225 replica

Posted: Sat Jun 14, 2008 7:58 am
by Basenji
Perhaps you can do sth with front grills?
I.E.
Image

zdrówko :grin

Re: Phase 2 225 replica

Posted: Tue Jun 17, 2008 11:13 am
by wanda
STEVIE wrote:
wanda wrote:I need to try that one day. When you took offthe bumper where did you put the wires of the old fog lights?

Hi mate what do you mean what did i do with the fog light wire
because i just left them dangling while i fitted the new bumper
steve



Ow I see. So even though the fog lights were in a different place they fit into the face two bumper. :cool:

Re: Phase 2 225 replica

Posted: Sun Jun 22, 2008 10:08 pm
by mark_b
hello m8
As i said in an earlier post car looks class. Now what i want to know, did you buy the bumper from renault?? And is there anything that differs parts ways when your converting it from a phase one to a phase two (exc. front lights)
thinking about doing that myself as yours looks class :cool:
mark...

Re: Phase 2 225 replica

Posted: Mon Jun 23, 2008 5:59 pm
by STEVIE
Ok guys and gals, l thought l'd put some information up regarding all the parts required to carry out a Phase 1 to Phase 2 front end conversion. In this case, the conversion was phase 1 225 to Phase 2 R26.

Please note that this conversion is only for non-xenon headlighted phase 1 vehicles.

Here is the list of parts required to complete the conversion.

The Phase 2 RS bumper consists of four part numbers:

77 01 477 043 - bumper + grilles = £327.39 + vat (£384.68)
77 01 477 197 - bottom undertray plate = £60.46 + vat (£71.04)
82 00 473 512 – rubber edge (also known as cup splitter) = £60 + vat (£70.05)
77 01 209 111 - air diffusers inside the bumper (for FMIC) = £23.37 + vat (£27.46)

The air duffusers are the parts which direct air into the FMIC so you may not require these if you intend to carry this out on a non-renaultsport Phase 1 vehicle or have an uprated FMIC.

The mounting for the phase 2 headlights is different to phase 1, therefore you will require the following additional parts:

82 00 412 348 - phase 2 bumper support left = £19.45 + vat (£19.45)
82 00 412 349 - phase 2 bumper support right = £19.45 + vat (£19.45)

The headlamp washers will only be required if you're considering this conversion for a non-renaultsport Phase 1 vehicle as you might not have these already.

82 00 082 370 – headlamp washer (each) = £9.39 +vat (£11.03)

The headlamp units required are as follows:

Right Hand Drive

77 01 063 222 – phase 2 halogen headlight left
77 01 063 223 – phase 2 halogen headlight right

These can be found relatively cheaply here:

https://www.crashrepairparts.com/pane...lt_megane_2006

If you intend to carry out this conversion on a left hand drive non-uk vehicle you will require the following parts

Left Hand Drive

77 01 063 218 - phase 2 normal headlight left
77 01 063 220 - phase 2 normal headlight right

Further help in removing and re-fitting of bumpers can be found here:

https://meganesport.net/bumperandintercoolerguide.htm

The Car As Is Now
pic taken at the FCS 22/6/2008


Image


stevie

Re: Phase 2 225 replica

Posted: Mon Jun 23, 2008 7:53 pm
by mark_b
great post stevie cheers :cool:

Re: Phase 2 225 replica

Posted: Thu Jun 26, 2008 5:40 pm
by steve the postman
you have had an excellent job done there and a great post
is that standard position for horn
handy to know i'm putting a better one on mine soon cause i can shout louder than it

Re: Phase 2 225 replica

Posted: Thu Jun 26, 2008 9:00 pm
by misty2k
Image

I didn't see your hood ornament on the accessories list, but I WANT ONE! ;) :-P


Dee

Re: Phase 2 225 replica

Posted: Thu Jun 26, 2008 9:18 pm
by STEVIE
Its amazing the stuff that sticks to your car on the motorway :D

steve