phase2 projecter headlights upgrade

For all stuff related to modifying your car

Moderators: q292u, Ray, AndyAdmin, Stranger

marshey
Learner Driver
Posts: 93
Joined: Mon Dec 05, 2011 6:01 pm

phase2 projecter headlights upgrade

Postby marshey » Mon Jun 16, 2014 8:37 am

Im only changing the headlights so will be making them fit!
Straight away away can see the new ones are bigger.

Image

They fit in places fine and bolts line up underneath them.

Image
Image

The angle of the top of the bumper is different.

Image

What i done was use masking tape to tape from the tip of the corner down towards grill keeping angle same as new headlights.

Image
Image

It fits but just needs a slight bit more trimming for bumper to go back a little more and close up that front bonnet shut line.

Image

User avatar
MilosB
Advanced Driver
Posts: 257
Joined: Sat Nov 16, 2013 8:39 pm
Currently Drives:: R. Megane 2 1.9dci sport package

Re: phase2 projecter headlights upgrade

Postby MilosB » Fri Oct 10, 2014 10:02 pm

Hi.
Were the connectors same on both headlights or you had to change them also ?
Thanks a loot in advance !!!
Renault Megane II 1.9dci sport p. 3dr. lowered on koni's,and exhausting through sebring

User avatar
DK-brun
Learner Driver
Posts: 65
Joined: Fri Jul 22, 2011 8:24 am
Currently Drives:: Renault Mégane II Tourer, Dynamique 2,0 16v
Location: Denmark

Re: phase2 projecter headlights upgrade

Postby DK-brun » Tue Oct 14, 2014 7:21 pm

Connecters should be the same unless you have OE xenon on your ph.1 :)

I have done the upgrade aswell.

Looks good!
Kasper Brun
Renault Mégane II Tourer, Dynamique 2,0 16v

User avatar
MilosB
Advanced Driver
Posts: 257
Joined: Sat Nov 16, 2013 8:39 pm
Currently Drives:: R. Megane 2 1.9dci sport package

Re: phase2 projecter headlights upgrade

Postby MilosB » Thu Oct 16, 2014 3:50 pm

Thanks a looot :D
no i dont have xenon on ph1 :(
Renault Megane II 1.9dci sport p. 3dr. lowered on koni's,and exhausting through sebring

marshey
Learner Driver
Posts: 93
Joined: Mon Dec 05, 2011 6:01 pm

Re: phase2 projecter headlights upgrade

Postby marshey » Sun Oct 19, 2014 6:55 pm

The connecters was the same for the light except for the height adjustment the plug is different size.

i was going to try get the proper plugs and cut wires and crimp on but never bothered as i dont adjust them anyway.

michael53
Posts: 3
Joined: Mon Nov 10, 2014 10:15 pm
Currently Drives:: megane convertible 2005

Re: phase2 projecter headlights upgrade

Postby michael53 » Wed Nov 12, 2014 10:30 pm

were did you get your bumper

marshey
Learner Driver
Posts: 93
Joined: Mon Dec 05, 2011 6:01 pm

Re: phase2 projecter headlights upgrade

Postby marshey » Mon Dec 01, 2014 7:54 pm

I got it a couple of years ago its a 225 bumper that i smoothed badge and wash holes off. Im breaking the car if your interested.


Return to “Modifications”

Who is online

Users browsing this forum: No registered users and 26 guests