The Mégane II Owners' Club

Hi there how easy is it to remove the front bumper on my megane?
Thanks

If it's like mine, easy peasy, 5/10 min job, max...

Nice one thanks for that am changing my head lights is that a easy job as well then.
Thanks

Yeah that's easy too, 3 bolts if I remember rightly, one on top one to the bottom and one to the outer side,

joeishmather wrote:Yeah that's easy too, 3 bolts if I remember rightly, one on top one to the bottom and one to the outer side,

Nice one thanks for that seen some black ones that i think would look good on my J LOW

Pay close attention to the plastic lugs that are part of the bumper assembly (NOT the black plastic push in things). If you have removed the three under bonnet M10 nuts/torx in the wheel arches and the trim at the top with the black push in clips and it still won't release at the top, inspect the two or more areas at the top. You will have to insert a screwdriver to release them. If you just tug at it you WILL break them off. If this happens, you can put it back, but it won't be 'proper'. Beware the fog light connector (near side) that can only be unplugged with the bumper half off (get an assistant to help).

https://www.meganesport.net/bumperandint ... rguide.htm

THIS IS A USEFUL LINK. CHECK IT OUT

Jay,

MIstry_J wrote:https://www.meganesport.net/bumperandintercoolerguide.htm

THIS IS A USEFUL LINK. CHECK IT OUT

Jay,

Thanks for that

Any one know if this lights are easy to fit or do you have to mod?
Thankshttp://cgi.ebay.co.uk/RENAULT-MEGANE-02-08-BLACK-TWIN-ANGEL-EYE-HEADLIGHTS_W0QQitemZ290544015156QQcategoryZ23009QQcmdZViewItemQQ_trksidZp5197.m7QQ_trkparmsZalgo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3DLVI%26ps%3D63%26clkid%3D7991224002964910264

McLaren wrote:Any one know if this lights are easy to fit or do you have to mod?
Thankshttp://cgi.ebay.co.uk/RENAULT-MEGANE-02-08-BLACK-TWIN-ANGEL-EYE-HEADLIGHTS_W0QQitemZ290544015156QQcategoryZ23009QQcmdZViewItemQQ_trksidZp5197.m7QQ_trkparmsZalgo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3DLVI%26ps%3D63%26clkid%3D7991224002964910264

They should fit straight on if they are the correct ones for your car, and should come with all the bits required . you'll need to remove the front bumper though to get the head lights out.

Jay,