Some pics of my motor. 1.9dci dynamique replica r26

For all stuff related to modifying your car

Moderators: q292u, Ray, AndyAdmin, Stranger

Pdlk24
Posts: 12
Joined: Sun Sep 05, 2010 8:40 pm

Re: Some pics of my motor. 1.9dci dynamique replica r26

Postby Pdlk24 » Tue Feb 22, 2011 11:11 pm

Good point eddie how wide are these adaptors never new they existed as surely it would effect
steering geometry? Not just the tracking what about kpi and the offset?

stihlman2010
Posts: 19
Joined: Sat Feb 12, 2011 5:20 pm
Currently Drives:: RENAULT MEGANE 1.9dci r26 replica

Re: Some pics of my motor. 1.9dci dynamique replica r26

Postby stihlman2010 » Wed Feb 23, 2011 7:07 pm

Eddie- wrote:iirc they only start at 15mm most will be 20/25mm if your wheels are say 7 to 7.5 wide you'll never get them out side the arch they'll just will fill the arch more and it wil put the offset out. you'd need to check the width of the new wheel's and then work out getting the spacers to suit if not buy bigger one's and get them lathe'd off a few mm till suit.


yad need to know wat ur at to lathe the adapters as they are threaded an ya myt nt get the startin thread again.. cud run into problems lol
Renault megane 1.9 dci 2003 black, renault 5000k auto xenon headlamps, originally 120bhp, drilled ebc front discs, green stuff pads all round, custom exhaust, custom wheels, rear tinted windows, lowered 45mm at front 85mm at rear, momo pedals

Pdlk24
Posts: 12
Joined: Sun Sep 05, 2010 8:40 pm

Re: Some pics of my motor. 1.9dci dynamique replica r26

Postby Pdlk24 » Sun Feb 27, 2011 9:49 pm

Good Luck with the mods anyway!
Have you seen the other replica conversion on here?
5K spent already....ouch after all that he sold it!


Return to “Modifications”

Who is online

Users browsing this forum: No registered users and 2 guests