seat probles

[first_megane]

would a set of 225 seats fit in a standerd dynamic ? if not what can i do to make them fit any ideas ?

[R55VYS]

yeah they will fit, just make sure there from a 3dr if yours is a 3dr, etc.

Also if there the recaro bucket seats from the r26's you would need to make sure all the runners and bases are with them

[first_megane]

wat tools do i need to take seats out and fit others in size bolts etc.

[R55VYS]

I forget what the tool is called, a star drive? just like an allen key but star shaped, not sure what size either, main thing you need to remember is to disconnect your battery, otherwise you'll set your airbags off, and poss end up with some black eyes.

[first_megane]

i dont think i have airbags on my megane standard seats or do i there only in the leathers arnt they

[Anthony]

No they all have airbags. You must disconnect the battery and wait about 10 minutes before removing them.

[steve-t]

30 mins to be sure
Steve

[first_megane]

so you mean the airbags in my leather seats will work in the dynamique im putting them into how do i go bout fitting jus leave 4 30 mins again

[Anthony]

-Unplug battery
-Leave for 30 minutes
-Take old seats out
-Bolt new seats in and connect airbag wiring
-Reconnect battery
-Away you go.

[first_megane]

thank you lads is the height raise handle the same off standard seats to leathers

[Anthony]

I would hazard a guess at yes. I think they are the same seat just leather faced.

[steve-t]

Aren't the air bags coded to the ecu? Trip to steelers on the way?
Steve

[M055Y]

They were a direct replacement in mine, didn't bother disconnecting the battery it was quite straight forward to swap over.

No warning lights popped up or anything

[R55VYS]

didn't bother disconnecting the battery

very stupid thing to have done by the way, dont anyone try and replace there seats without disconnecting the battery first.

[M055Y]

didn't bother disconnecting the battery

very stupid thing to have done by the way, dont anyone try and replace there seats without disconnecting the battery first.

it worked out fine for me