17" Pro Race 2 in silver

[Anthony]

What you all rekon to silver Pro Race 2's 17" on an ottoman sporthatch? The offset is 38 and the tryes would more than likely be 205/50/17.

My meg has been lowered 30mm and the bumper trims have been colour keyed.

Let me know what you think! I quite like the understated design of this wheel, plus they are lightweight!

Ant.

[Anthony]

Same style just with 4 stud and a better centre cap!

[McLaren]

I think that would look well.

[Anthony]

Ahh a reply! In the end I found a deal I could not let go on a set of 18" pro race 1.2's with tyres. They are being delivered tomorrow and I cannot wait to fit them! They will finish it off nicely.

[Toosh]

Must of missed this. I like the look of them but will reserve judgment till i see them on your Meg Anthony

Im guessing you will need to get it slammed?

[Anthony]

Must of missed this. I like the look of them but will reserve judgment till i see them on your Meg Anthony

Im guessing you will need to get it slammed?

Yeah it's not actually those I went for in the end. If you search Team Dynamics Pro Race 1.2 on google images you shall see.

And thankfully I did it the right way round. I have already lowered it 30mm so it won't look like a monster truck with just big alloys on.

[Anthony]

[Gibzy]

Hi Anthony, not to be cheeky, but how much did they set you back. wouldnt mind a set for mine.

GIbzy

[Anthony]

Hi Anthony, not to be cheeky, but how much did they set you back. wouldnt mind a set for mine.

GIbzy

They sell them in Halfords and all over the internet. The 18" wheel and tyre package goes for about £850-£900 but I got my set for alot less off eGay (pm sent). They were 2nd hand but had never been used. Came with a nice set of Falken tyres already fitted.

They are fantastic wheels. 18" up from the standard 16" and they are noticeably lighter.

I will stick some pics up when I have cleaned it.

[Anthony]

Damn. It has cut half the pic off in the second one but you get the idea

[BlueMeganeII]

I think in 18" form they won't be a million miles away from the R26s.

[Toosh]

I like. Doesn't look like they have the silver rim like the pic above? Which is good.

[Anthony]

No they don't have the silver rim. That was just a pic from google images.

[Mez]

did u colour code those inserts yourself hun ???

what did u have to do ?? if u did them ?

[Anthony]

did u colour code those inserts yourself hun ???

what did u have to do ?? if u did them ?

My cousin works in body repair and he does little jobs on the side. He only wanted £60 for it but that is family rate! I could of done it myself but for the sake of £60 and the possibility of messing it up, I let him do it.

You have to take the bumpers off to pop the inserts out from behind. Then they want sanding down because they have a texured finish. A high build plastic primer wants putting on, then multiple layers of top coat and lots of lacquer. Then they need polishing and fitting.

The end result is fantastic but I have picked up quite a few stone chips on the front trims because I do alot of motorway miles
Still looks better than standard though.