The Mégane II Owners' Club

Hi, where do people normally fit boost gauges in Megane's? Ive always wanted to have one for novelty more than anything.

I dont want to drill anything or remove anything really if possible. Where do you route the pipe from engine bay into the compartment?

Looking at a 52mm version of one

i would also be interested in fitting one of these, but ive no idea where to start

I fitted one.

see the front quarter panel. you'll be able to thread the pipe along there to the inside of the car.

i'll take pics n show u, 'even tho ive no megane the description will still be the same'

Brilliant thanks for that, ill wait for the pic as im still not too sure.

Thanks

Yeah just thinking of a 15 PSI max one - 52mm

No idea what it would boost to as standard but imagine the 15 would be ok?

nope too low, mine boosted to 22psi

Ahh thanks for that, ill look for ones up to 30 psi then

Just got to figure out what you mean to get it through lol

Does a 120 DCi really boost to 22psi as standard? would of thought it was less for some reason

Any ideas where to mount the pod where i wouldnt have to drill or anything. was thing in the corner of the windscreen near the A pillar just stuck down with some double sided tape or something

i'll get the phots up over the weekend as im in work atm.

1 bar wouldn't be enough if it boosts to 22psi.
1 bar = 14.5psi

I don't know anything about boost pressures but given 1 bar is normal air pressure I though it'd be higher than 22psi.

Standard Subaru's Boost to about 22psi, when a bit of work has been done to them get boost to about 2-2.5 BAR

i had one on my old 306, the novelty wore off in about a week