Interior lights
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Learner Driver
- Posts: 84
- Joined: Fri Jun 11, 2010 6:29 pm
- Currently Drives:: megane II 2.0 DYNAMIQUE black
- Location: kent
Interior lights
Hi does anyone know if its possible to change the colour of lighting on the speedo dials and dash ???
-
- F1 Driver
- Posts: 1957
- Joined: Sat Aug 23, 2008 5:22 pm
- Currently Drives:: Megane Saloon 2.0 VVT Dynamique
- Location: Belfast, Northern Ireland
- Contact:
Re: Interior lights
Yes, simply replace the SMD's with what ever colour you fancy.
-
- Learner Driver
- Posts: 84
- Joined: Fri Jun 11, 2010 6:29 pm
- Currently Drives:: megane II 2.0 DYNAMIQUE black
- Location: kent
Re: Interior lights
Thanks ulrich where do i find the right smds and are they easy to do ???
-
- F1 Driver
- Posts: 1957
- Joined: Sat Aug 23, 2008 5:22 pm
- Currently Drives:: Megane Saloon 2.0 VVT Dynamique
- Location: Belfast, Northern Ireland
- Contact:
Re: Interior lights
whufc1990 wrote:Thanks ulrich where do i find the right smds and are they easy to do ???
No its far from easy. You are working with a component smaller than a pin head. Which has to be removed from the PCB board and then the new ones resoldered.
Here is a before and after when i did a friends clio clocks..



The SMD's used in the megane are much smaller however.
-
- Learner Driver
- Posts: 84
- Joined: Fri Jun 11, 2010 6:29 pm
- Currently Drives:: megane II 2.0 DYNAMIQUE black
- Location: kent
Re: Interior lights
Them dials look fab in white i used to have a clio and now i have the meg the orange is getting boring lol i dont suppose you have a link to those smd's ??
-
- F1 Driver
- Posts: 1957
- Joined: Sat Aug 23, 2008 5:22 pm
- Currently Drives:: Megane Saloon 2.0 VVT Dynamique
- Location: Belfast, Northern Ireland
- Contact:
Re: Interior lights
The SMD's pictured are far to big for the meganes PCB.
The reason i havent done my own is they are far to small to work with.
At the factory it was all done with a pick and place robot. To hard to work with at that size.
The reason i havent done my own is they are far to small to work with.
At the factory it was all done with a pick and place robot. To hard to work with at that size.
-
- Learner Driver
- Posts: 84
- Joined: Fri Jun 11, 2010 6:29 pm
- Currently Drives:: megane II 2.0 DYNAMIQUE black
- Location: kent
Re: Interior lights
fair enough, its a shame tho really dont like the orange lol is that your meg in your pic?
-
- F1 Driver
- Posts: 1957
- Joined: Sat Aug 23, 2008 5:22 pm
- Currently Drives:: Megane Saloon 2.0 VVT Dynamique
- Location: Belfast, Northern Ireland
- Contact:
Re: Interior lights
whufc1990 wrote:fair enough, its a shame tho really dont like the orange lol is that your meg in your pic?
Yea that's her...
Who is online
Users browsing this forum: No registered users and 20 guests