Megane Facelift Rear light Cluster Part No's Here

soterman · Postby **soterman** » Mon May 01, 2006 9:58 pm

Nice one Ray! Can you put up some photos at night? I want to see emergency lights, reverse and brakes (that's a bit difficult to do alone) and the fog light. When you find the time, no rush!

ado · Postby **ado** » Mon May 01, 2006 10:07 pm

Whose car is that ray? Unless you changed cars and thats definately not yours.

Christos · Postby **Christos** » Tue May 02, 2006 9:22 am

Hey PAUL5765 looks good mate.

Is there any chance you could take some pics of the wiring?

Cheers
Chris

ado · Postby **ado** » Tue May 02, 2006 9:48 am

Oh. That does look good Paul5765.

Postby **Ray** » Tue May 02, 2006 1:33 pm

soterman wrote:Nice one Ray! Can you put up some photos at night? I want to see emergency lights, reverse and brakes (that's a bit difficult to do alone) and the fog light. When you find the time, no rush!

it's paul's car... PM him to see if he can do it. i only provide the hosting.

StooferTheCat · Postby **StooferTheCat** » Thu Jun 29, 2006 7:55 pm

Q: Can you not use the wiring & bulb set from the phase I in the shell on the phase 2 or do the have different mounts?

Privilege · Postby **Privilege** » Fri Jun 30, 2006 7:53 am

StooferTheCat wrote:Q: Can you not use the wiring & bulb set from the phase I in the shell on the phase 2 or do the have different mounts?

The position of the lamps are different in the Phase II

e.g. tail lights used to be on the inside angle, but are now along the bottom of the cluster

Christos · Postby **Christos** » Sun Jul 02, 2006 11:41 am

no you cant use the existing buld holders and the wireing is different also

jlberry · Postby **jlberry** » Sun Aug 27, 2006 1:32 am

i managed to remove the wires from the cradles with the use of a small flat-head screw-driver. Just pull of the top/seal and you should see the pin holders on both side, just move the pins outwards in pairs and bingo, the wire is released. I connected the wires to the new lamps as previously suggested (taping each pin in turn to prevent shorting) and then taped it all up for a good seal.
I did notice that only one fog light works, need to think about this one - may need an additional wire extended from the O/S to the N/S.

Postby **Ray** » Sun Aug 27, 2006 1:42 am

no, having one rear fog light is correct...

MrAsia · Postby **MrAsia** » Sun Aug 27, 2006 2:15 am

why use one when you can have two

renier · Postby **renier** » Sun Aug 05, 2007 9:16 am

This has also been described on the German Megane forum, with a lot of pics

https://213.133.123.93/megane/index.php/ ... 706.0.html

kylehimself · Postby **kylehimself** » Thu Aug 09, 2007 1:04 pm

sorry im posting this ages after everyone stopped talking about it, but ive just bought some face lift rear lights. and to be honest, im baffeled at all the talk about wiring them in, i could do it myself, but would need a bit more detail maybe even some pics of the lights when they are wired in. can anybody help me?

renier · Postby **renier** » Thu Aug 09, 2007 2:49 pm

At the moment, I'me working on them myself!

Yesterday I've worked out the right unit and did all the necessary wiring, took me the good part of the day to get all the necessary parts/wiring, figure out a plan and finally do all the wiring and testing. I do not want to rush things. The right unit is working perfectly now, I hope to tackle the left unit this weekend. This is a little more complex as you have one additional light over there (fog). But I'me confident that this will also succeed as I now have an idea how to do it and all the necessary parts.

Basenji · Postby **Basenji** » Fri Aug 10, 2007 7:49 am

I'm thinking of something similar. Write more details and include pictures.
zdrówko

The Mégane II Owners' Club

Megane Facelift Rear light Cluster Part No's Here

Who is online