Hi I have a dump valve on my megane 225 and was thinking of getting a forge blanking plate as I'm after a more "chatter" noise when It dumps , is this the right way to go about it ??
Anyone already got one fitted and have any feedback ??
Cheers
Blanking plate
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Posts: 11
- Joined: Wed Jan 22, 2014 6:52 pm
- Currently Drives:: Megane Sport 225
-
- Driving Legend
- Posts: 4312
- Joined: Tue Mar 22, 2005 8:17 pm
- Currently Drives:: Renaultsport R.S.250 Cup
Re: Blanking plate
No, the maximum you can get is the dump valve sound, but you will need a dump valve replacement as well. The chatter is a different thing - it is a compressor surge caused by an imperfect dump valve design, i.e. something you don't want to have.
My advice is to not fiddle with these, as you will lose power as a result. It is hard to beat the stock setup. If you want more noise, then change the exhaust, just make sure the noisy one is not heavier.
My advice is to not fiddle with these, as you will lose power as a result. It is hard to beat the stock setup. If you want more noise, then change the exhaust, just make sure the noisy one is not heavier.
AlexB
(no, a different AlexB)
(no, a different AlexB)
Who is online
Users browsing this forum: No registered users and 48 guests