The Mégane II Owners' Club

Hi all im having serious issues getting the double din unit to sit flush, the bottom seems to stick out somewhat. iv read somewhere that some german guy butchered his dash to get it to fit! looked nice when fitted tho,

i have a double din fascia from connects2 (CT23Rt03) but doesnt seem to fit as the upper half of the hole is a little more out than the lower part of the hole!

someone please shed some light!

Think that was me..

There is two protruding plastic moulds (which help to hold the standard radio in place) You need to cut these away to allow for the mass of cabling behind a double din.

This is the reason yours wont sit flush.

Look through my previous posts for detailed instructions.

P

https://www.meganeownersclub.co.uk/forum ... 55&start=0